No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
New products
-
2022+ ARCTIC CAT ADAPT LOW ALTITUDE PRO SHIFT CLUTCH KIT
FOR ADAPT CLUTCHES NEW FOR ARCTIC CAT IN THE 2022 MODEL YEAR! INCLUDES...
$329.95 -
2022+ ARCTIC CAT ADAPT BACK COUNTRY LOW ALTITUDE PRO SHIFT CLUTCH KIT
FOR ADAPT CLUTCH NEW FOR ARCTIC CAT IN THE 2022 MODEL YEAR! INCLUDES...
$329.95 -
2022+ ARCTIC CAT ADAPT HIGH ALTITUDE PRO SHIFT CLUTCH KIT
FOR ADAPT CLUTCH NEW FOR ARCTIC CAT IN THE 2022 MODEL YEAR! INCLUDES...
$329.95 -
ADAPT 4-Stroke Clutch Upgrade Kit
EVERYTHING you need to replace your TEAM primary Clutch with the better...
$874.95 -
ADAPT 2-Stroke Clutch Upgrade Kit
EVERYTHING you need to replace your TEAM primary Clutch with the better...
$899.95 -
Pro-Mag Arctic Cat ADAPT Weight Set
New for 2022 Arctic Cat released the Adapt Primary clutch. This clutch...
$164.95
1000 TWIN 2007-2010 There are 101 products.
-
ARCTIC CAT CLUTCH PULLER 2010+ AND 2007+... ARCTIC CAT CLUTCH PULLER 2010+ AND 2007+...
Top quality heavy clutch pullers for your snowmobiles. One piece design, precision machined, and heat treated for strength. This model fits all 2010 and newer models, and 2007 and newer 1000 twin and 1100 4 strokes. Also fits: Wildcat UTVs, X and XX Yamaha MountainMax 800 2021 Top quality heavy clutch pullers for...
$44.95
In Stock -
RAGE CAGE FOR ARCTIC CAT 1000 AND 50MM... RAGE CAGE FOR ARCTIC CAT 1000 AND 50MM...
Patented, one piece, cast aluminum Reed Block system that delivers guaranteed bolt on performance. No modifications required. Gain much quicker throttle response, excellent bottom end power and 3 peak horsepower with these Boyesen Rage Cages! A GREAT REPLACEMENT REED VALVE THAT REALLY WORKS WELL! ALSO USED ON 700/800CC MODELS WHEN UPGRADING TO 50MM... Patented, one piece, cast aluminum...
$369.95
In Stock -
RAGE CAGES FOR 52 & 56MM THROTTLE BODIES... RAGE CAGES FOR 52 & 56MM THROTTLE BODIES...
This valve was developed specially to be used with our larger 52 & 56 mm throttle bodies. This makes the best horsepower possible with our throttle bodies. The multi petal design produces the best throttle response and airflow. Can be used on Arctic Cat 800 model with the 52mm throttle bodies, or our 56mm throttle bodies for the 1000 models. Usually... This valve was developed specially to...
$389.95
In Stock -
Titanium Bolt Kit for Cat 1000 Twin Engine Titanium Bolt Kit for Cat 1000 Twin Engine
Now a complete engine (1000cc) and chassis titanium bolt kit which gives you a 5 lb weight saving. Can be ordered as engine kit alone, chassis kit alone or complete kit. Available for all M’s and Crossfire chassis. These are forged grade 8 bolts. Now a complete engine (1000cc) and...
$499.95
In Stock -
Allen Clutch Bolt-Titanium for Cat 1000 Allen Clutch Bolt-Titanium for Cat 1000
Clutch lite weight grade 8 titanium allen head Bolts. Fits '07 and Up. ONLY FOR 1000 MOTORS. Clutch lite weight grade 8 titanium...
$18.50
In Stock -
XS819 (M1000, F1000, M8, F8, CF6, F6, CF5... XS819 (M1000, F1000, M8, F8, CF6, F6, CF5...
We found these belts to be the best in the industry! Top notch performance and even comes with a manufactures 1 year warranty! These belts are very flexible yet very durable. And the price is so much better than a OEM that doesn't have a warranty. Fits M1000, F1000, M8, F8, CF6, F6, CF5 2007-2011 We found these belts to be the best...
$174.95
In Stock -
PRO MAG ADJUSTABLE WEIGHTS 78-90... PRO MAG ADJUSTABLE WEIGHTS 78-90...
PRO-MAG weights are an easily adjustable weight for Arctic Cat models. They are adjustable in 1.3 gram increments so you can really fine tune your machine. They hit hard when you grab a handful of throttle, they backshift quick for improved throttle response, and they are smooth when you maintain rpm ranges. PRO-MAG weights are an easily...
$164.95
In Stock -
DIAMOND DRIVE BEARING KIT 04-06, 09-11 W/... DIAMOND DRIVE BEARING KIT 04-06, 09-11 W/...
This simple kit supplies you with all of the roller bearings in the Diamond Drives. Don't forget to order your seal kit and lube at the same time. This version is for 04-06 models, and 09-11 models with engine reverse. This simple kit supplies you with all...
$94.95
In Stock -
DIAMOND DRIVE BEARING KIT 2007 AND... DIAMOND DRIVE BEARING KIT 2007 AND...
This simple kit supplies you with all of the roller bearings in the Diamond Drives. Don't forget to order your seal kit and lube at the same time. This version fits all 2007 and newer with reverse in the diamond drive. This simple kit supplies you with all...
$94.95
In Stock -
BDX ROCK ROLLERS FOR DIAMOND DRIVE BDX ROCK ROLLERS FOR DIAMOND DRIVE
ROCK Performance Rollers are made from engineering grade plastics designed to withstand continuous exposure to elevated temperatures and severe stress conditions. ROCK Performance Rollers low coefficient of friction and ROCK hard compound make ROCK Performance Rollers the most advanced engineered rollers to date. Made in the USA ROCK Performance Rollers are made...
$54.95
In Stock -
POWER VALVE PLUS FOR 1000 CAT TWIN 2007-2010 POWER VALVE PLUS FOR 1000 CAT TWIN 2007-2010
Finally a kit that you will lose 4 lbs of unwanted weight, no more misadjusted cables, broken cables. The 1000 twin picks up 10-14 horsepower in the mid range (6300-6800 rpm) with these installed! Comes with billet valve inserts, all hardware and electronic chip. Works great to clean up the rich mid range on 2009-2010 models. Finally a kit that you will lose 4...
$239.95
In Stock -
OIL INJECTION ELIMINATION KIT OIL INJECTION ELIMINATION KIT
Finally an oil injection elimination you do not have to maintain! We use a lubricant injected bushing, this means no greasing, install and forget about it! We have yet to wear one out! Fits 03' - UP 600cc, 700cc, 800cc, 1000cc Arctic Cats (Lay Down Motors) Finally an oil injection elimination...
$49.95
In Stock -
ANTI STAB KIT 07 AND UP ARCTIC CAT ANTI STAB KIT 07 AND UP ARCTIC CAT
BDX has developed an Anti-Stab Roller Kit for the M-Series sleds. It's designed to help prevent the rail tips from stabbing through the track windows. It also eliminates the vibration produced when the rail tips click on the windows. This vibration is felt in the foot-wells while operating in loose snow conditions. BDX has developed an Anti-Stab Roller...
$99.95
In Stock -
ANTI SLOP STEERING SUPPORT BRACKET... ANTI SLOP STEERING SUPPORT BRACKET...
Eliminate the steering post slop from your stock support! The new BDX Anti-Slop Support will eliminate the slop from the stock support and lessen the chance of your steering post breaking! 2005-2011 P M-Series and X-Fire. Eliminate the steering post slop from...
$99.95
In Stock -
ADJUSTABLE CHROME MOLY STEERING POST- M... ADJUSTABLE CHROME MOLY STEERING POST- M...
Adjustable Chrome Moly steering post for M series and CrossFire. 2 Pounds lighter then the stock steering post! Black Diamond recommends Xtreme Anti-Slop Steering Post Support. Part Number 20014 Adjustable Chrome Moly steering post...
$299.95
In Stock -
EYEPOD AIR INTAKE AND SPEEDO MOUNT EYEPOD AIR INTAKE AND SPEEDO MOUNT
Fits 08-10 Arctic Cat M and Crossfire. It will improves your ability to see the stock gauge plus has two optional customer cut 2 1/16 gauges holes! Available space to mount Koso gauges. Also has a compartment for storing your googles or gloves. The vents on the front and side will proved air flow to dry your gloves or googles in no time! Fits 08-10 Arctic Cat M and...
$79.95
In Stock -
M-Xfire Xtreme Foot Stirrup-Pair M-Xfire Xtreme Foot Stirrup-Pair
M-Xfire Xtreme Foot Stirrup. Makes it easier to hold the sled with your foot. For M series sleds and X fires M-Xfire Xtreme Foot Stirrup. Makes it...
$19.95
In Stock -
BDX Pro-Lite Series Hood Screens,... BDX Pro-Lite Series Hood Screens,...
Getting snow under your hood from the forward hood vents? Use the BDX Hood Vents! BDX Pro-Lite Series Hood Screens, 2005-2011 M SERIES AND XFIRE Getting snow under your hood from the...
$34.95
In Stock -
BDX Pro-Lite Series 9 Piece Vent Kit,... BDX Pro-Lite Series 9 Piece Vent Kit,...
Damage to your existing screens? Built you own air box? Use the Black Diamond 9 piece vent kit! Damage to your existing screens?...
$109.95
In Stock -
Pro-Lite Series Side Panel Vent Kit,... Pro-Lite Series Side Panel Vent Kit,...
Black Diamonds Pro-Lite Series Side Panel Vent Kit allows excess heat out without letting snow in!! Easy to install! Utilizing the Frogskin Material for an easy install. Simply cut out the vent openings on the side panel and the new Frogskin will stick right on. Just peel the backing off and the adhesive will hold the vents in place. Normally $59.95,... Black Diamonds Pro-Lite Series Side...
$64.95
In Stock -
Pro-Lite Series Inner Idler Wheel Kit... Pro-Lite Series Inner Idler Wheel Kit...
Want to take your front stock idlers off without abnormal hi-fax wearing? This is the kit you need. Fits 2007-2019 X-Fires and M Series. Want to take your front stock idlers...
$109.95
In Stock -
DIAMOND DRIVE CLUTCH BOLT AND BELT... DIAMOND DRIVE CLUTCH BOLT AND BELT...
If you are purchasing one of our 10.4 diameter clutches and you have a screw in belt adjuster, then you need to use this hardware and vented bolt kit to hold the clutch on. It will work as a replacement for all years of diamond drives. This also is what is used to adjust the belt defection. If you are purchasing one of our 10.4...
$54.95
In Stock -
XTREME DUTY OIL CHANGE KIT 15 OZ (09-UP... XTREME DUTY OIL CHANGE KIT 15 OZ (09-UP...
XTREME DUTY OIL CHANGE KIT 15 OZ (09-UP REVERSE CASE) XTREME DUTY OIL CHANGE KIT 15 OZ...
$18.95
In Stock -
XTREME PRO LITE CHROME MOLY A ARM SET 40"... XTREME PRO LITE CHROME MOLY A ARM SET 40"...
Lightweight and strong chrome moly A arm set for M series machines and Xfires with 40" stance. Chrome plated. SALE PRICED!!! 50 OFF!! Lightweight and strong chrome moly A...
$439.95
In Stock -
XTREME CHROME MOLY FRONT END KIT 42" M... XTREME CHROME MOLY FRONT END KIT 42" M...
Lightweight and strong chrome moly A arm set for M series machines and Xfires with 42" stance. Chrome plated SAVE $100!!! Lightweight and strong chrome moly A...
$329.95
