Save yourself the headache of worn out Lower A-Arms. ALL Catalysts, no...
Direct replacement for 2024+ Catalyst models, Utilizes factory seat...
Send in your Shocks for Rebuild and kick yourself for not doing it...
Send in your Shocks for ZERO wait, in stock, ready to ship. This valve...
858 ADAPT Billet primary clutch cover replaces cats flimsy stock cast...
Top quality heavy clutch pullers for your snowmobiles. One piece design, precision machined, and heat treated for strength. This model fits all 2010 and newer models, and 2007 and newer 1000 twin and 1100 4 strokes. Also fits: Wildcat UTVs, X and XX Yamaha MountainMax 800 2021 Top quality heavy clutch pullers for...
Our mountain series billet heads bolt on some serious power for your Arctic Cat 6000 motor. It is designed to run on premium pump gas when ran above 4000 ft altitude. Huge torque gains to provide the grunt you need and want for boondocking and climbing. Much quicker throttle response! 6-7 horsepower peak and in the mid range! These heads work extremely... Our mountain series billet heads bolt...
PRO-COOL billet heads bolt on some serious power for your snowmobile. The low altitude versions provide extra cooling capacity; they look great, and bolt on power. They add 3-4 peak horsepower with a lot of mid-range grunt too. PRO-COOL heads run on premium pump gas, 91 or higher octane. This high quality machined kit comes with a billet head cover and... PRO-COOL billet heads bolt on some...
BDX Pro Lite Running boards for Arctic Cat Pro-Climb/ProCross and Yamaha SRViper and SRViper MTX. -No snow buildup -Anti slip design built right into the aluminum extrusion (stock running boards must be removed from tunnel) Only a few colors left (we will not be making more) BDX Pro Lite Running boards for...
This PROLITE version is 2.5 lbs lighter than stock. It is threaded on the end instead of using a snap ring to hold the pulley on. But it can also be used as a direct lightweight replacement for the stock shaft. It does have the snap ring grove on it too for the stock snap ring retainer. The larger diameter tube is stronger than stock too. This PROLITE version is 2.5 lbs...
This heavy duty shaft has a longer spline than stock so that the upper pulley of a belt drive has more support. This helps prevent premature wear of the splines which can cause excess wobbling. It also has a bolt on the end to keep the pulley tight against the bearing to also help eliminate wobbling of the upper pulley. This heavy duty shaft has a longer...
Black Diamond has developed an Anti-Stab Roller Kit. It is designed to help prevent the rail tips from stabbing through the track windows. It also eliminates the vibration produced when the rail tips click on the windows. Black Diamond has developed an...
INVENTORY REDUCTION SALE!! SAVE $75!! -Lightweight and Strong Chrome Moly Swing Arm Kit for 2012-15 Arctic Cat ProClimbs 153 & 162, XF141" tracks and Yamaha SRViper MTX 2015-Includes front arm, rear arm, and rear shock link-Saves 4 pounds over stock INVENTORY REDUCTION SALE!! SAVE $75!!...
We found these belts to be the best in the industry! Top notch performance and even comes with a manufactures 1 year warranty! These belts are very flexible yet very durable. And the price is so much better than a OEM that doesn't have a warranty. FITS 2012-2017 ARCTIC CAT 800, 8000, AND 2014-2017 6000 We found these belts to be the best...
PRO-MAG weights are an easily adjustable weight for Arctic Cat models. They are adjustable in 1.3 gram increments so you can really fine tune your machine. They hit hard when you grab a handful of throttle, they backshift quick for improved throttle response, and they are smooth when you maintain rpm ranges. PRO-MAG weights are an easily...
Lite Weight trackshaft is 1 pound less than stock trackshaft. Fit's 2012-Up Arctic Cat models. Also fits Yamaha Viper and Sidewinder This shaft is very strong and has been used by several 600+ horsepower race sleds. Lite Weight trackshaft is 1 pound...
PRO LITE 2012-2017 PROCLIMB/PROCROSS TRACK SHAFT W/8 TOOTH DRIVERS 1LB LIGHTER THAN STOCK PRO LITE 2012-2017 PROCLIMB/PROCROSS...
Sick of your pipe sensor going bad on your machine? You can bypass the sensor with this plug in resister block off. Then you don't need to run the pipe sensor anymore. This is a lot less money than the stock sensor too. Sick of your pipe sensor going bad on...
Whether you have a stock front end or our new PRO-Lite Forged front end, you can upgrade your lower A arms with these Chrome Moly versions. They are arched for extra clearance to help prevent hitting rocks and stumps. The Chrome Moly material is also very strong. The weight is about the same as stock, but better of course. Whether you have a stock front end or...
For Arctic Cats with Team clutches is our Pro Mag adjustable weights that are adjustable from 64-86 grams. They have 4 positions per weight arm with easy to use magnets. This allows you have proportion the weight just the way you want it, whether you want a light or heavy tip weight. And our price is even much less than a stock un adjustable weights. For Arctic Cats with Team clutches is...
Black Diamond offers a ful line of LED light bars, curved and straight. 3W Cree Each LED Operating Volt: 10-30 DC Color Temperature: 6000K Operation Temp: -40C to 60C Waterproof Rate: IP65 Beam: Spot Beam, Flood Beam, Combo Beam Material: Diecast Aluminum... Black Diamond offers a ful line of...
Adjust your adjustable spring rate clutch with ease using the BDX Spring Tool! For all BDX/SSI helixes with adjustable spring tension end cap. The back side accepts a 1" wrench or socket to make it easy to turn. When installing our clutch kits which have the torsion spring style helix, use this tool to fit into the endcap to adjust the spring tension. Adjust your adjustable spring rate...
We have been using power commanders for years. They are very precise and work extremely well. They sense true throttle position and rpm ranges to fine tune the maps. The auto tune can be added or the POD-300 gauge to monitor air fuel ratios, data logging and change to multiple maps. When you purchase from us we will put the map into it for our products... We have been using power commanders...
The POD-300 is an accessory display for Dynojet devices that support DJ-CAN; including the popular Power Commander V, AutoTune, WideBand 2, and CMD. The POD-300 is an accessory display...
POD-300 Handlebar Mount Kit, BLACK POD-300 Handlebar Mount Kit, BLACK
Use this map switch to toggle between dual maps on your power commander Use this map switch to toggle between...
This is a popular upgrade for a machine with 7 tooth drivers and a 3" track. Stock machines, such as the M8000, come with 19-50 gears (2.63 ratio). Going to the 21-49 gears (2.33 ratio) makes a very nice improvement in track speed and performance while climbing. These are HYVO gears which can be used with your stock chain on 2016-2017 models. This is a popular upgrade for a...
This is a popular upgrade for a machine with 7 tooth drivers and a 3" track. Stock machines, such as the M8000, come with 19-50 gears (2.63 ratio). For big bore and turbo machines, going to the 22-48 gears (2.18 ratio) makes a very nice improvement in track speed and performance while climbing. These are HYVO gears which can be used with your stock... This is a popular upgrade for a...
Track ratcheting? Old extroverts worn? Try out Xtreme 8 tooth extroverts! Fits all Diamond Drive trackshafts. 3.0 pitch. Fits Arctic Cat 2004 and newer diamond drive sleds, Arctic Cat 2012 and newer. Yamaha Viper, plus Sidewinder. Fits 1 3/4" hex shaft Track ratcheting? Old extroverts...
Old drivers worn? Try our Xtreme 9 tooth drivers! Fits all Diamond Drive trackshafts. 2.52 pitch Also fits all Arctic Cat ProCross / ProClimb, and Yamaha Sidewinder and Viper. Old drivers worn? Try our Xtreme 9...