Get more power out of your Catalyst with this one simple mod! Our stage...
Get more power out of your Catalyst with this one simple mod! Our stage...
New for your 2024+ Catalyst! the PROMAX Front bumper Is the ultimate...
Black Diamond has developed an Anti-Stab Roller Kit. It is designed to help prevent the rail tips from stabbing through the track windows. It also eliminates the vibration produced when the rail tips click on the windows. Black Diamond has developed an...
BDX liquid filled fuel pressure gauge resists shock and vibration! An excellent addition to monitor your fuel pressure! up to 100 psi. 1.5 inch diameter **CALL FOR BULK PRICING** BDX liquid filled fuel pressure...
2.5in wheel with sealed 5/8ID bearing. 2.5in wheel with sealed 5/8ID bearing.
2.75 INCH REPLACEMENT WHEEL WITH SEALED BEARING 5/8" 2.75 INCH REPLACEMENT WHEEL WITH...
Want to take your front stock idlers off without abnormal hi-fax wearing? This is the kit you need. Fits 2007-2019 X-Fires and M Series. Want to take your front stock idlers...
Patented, one piece, cast aluminum Reed Block system that delivers guaranteed bolt on performance. No modifications required. Gain much quicker throttle response, excellent bottom end power and 3 peak horsepower with these Boyesen Rage Cages! A GREAT REPLACEMENT REED VALVE THAT REALLY WORKS WELL! ALSO USED ON 700/800CC MODELS WHEN UPGRADING TO 50MM... Patented, one piece, cast aluminum...
Our Stainless Steel mufflers are polished for a great look! The dual overlapping baffles have a nice deep tone without being too loud. This super lightweight muffler design weights just 6 lbs!! That's 14-16 lbs lighter than stock!! Our Stainless Steel mufflers are...
Kit comes with magnesium chain case cover, dip stick to check oil and drain plug! Saving you 8 1/2lbs. Eliminates the heavy stock oil tank. This version comes with our BDX oil pump block off so you can premix and drop even more weight. SALE PRICED AT ONLY $174!! NORMALLY $234.90!! SAVE $60!! Kit comes with magnesium chain case...
Update your Proclimb with our new PROMAX cold air intake cowl and hood. The intake draws air from the front end under the cowl above the A arms, and side of the nose. And the PROMAX intake draws air from behind the digital gauge. The setup provides crisp cool air to the motor and does improve throttle response. It won't plug up in deep snow either.... Update your Proclimb with our new...
If you have our intake and need a replacement, or if you want to customize your sled by removing the headlight. Some people have adapted them to the 4 stroke models too. They are available for both gauge styles, 2012-2017 Sno Pro gauge, or the newer style Arctic Cat gauge used on M6000 models, and M8000 models 2018 and newer. This gauge is used in... If you have our intake and need a...
This pipe mod is one that really works great! It makes 5-6 horsepower over stock, and you can really feel the gains. You can put your stock heat shield on it so no ones knows. Do this with our Y pipe for a 10 horsepower gain! Not only will you gain peak power, but this setup adds a lot of low end and mid range torque! No fuel controller required because... This pipe mod is one that really...
BDX has a developed a new replacement "ANTI-SLOP" steering post bushing for the Arctic Cat Pro-Climbs 2012-2021. We were the originator for the Arctic Cat M Series sleds, and the newer machines sure need it too. The Anti-Slop 2.0 bushing is made of a high strength, high yield, high compression material that will take up the slop of your factory... BDX has a developed a new replacement...
BDX has a developed a new replacement "ANTI-SLOP" steering post bushing for the Arctic Cat Pro-Climbs and Ascenders 2012-2020 Mountain sleds. Also fits the high country models with the dual post steering. We were the originator for the Anti-Slop kit for the Arctic Cat M Series sleds, and the newer machines sure need it too. BDX has a developed a new replacement...
This kit gives you the best bang for your buck for both performance and weight! - 15 lbs of weight with our polished stainless steel muffler - The performance stainless Y pipe and Boyesen reeds 7-8 more horsepower and 5 more lb/ft of torque! - Put the power to the ground with our Pro-Shift clutch kit This kit gives you the best bang for...
This kit give you the best bang for your buck for both performance and weight! - 15 lbs of weight with our polished stainless steel muffler, or 17 lbs less with the Titanium Muffler!! - The performance stainless Y pipe and Boyesen reeds 7-8 more horsepower and 5 more lb/ft of torque! - Put the power to the ground with our Pro-Shift clutch kit This kit give you the best bang for...
EXHAUST SPRING TOOL 15" PULL AND PUSH EXHAUST SPRING TOOL 15" PULL AND PUSH
Universal Spring Compressor *Removes all primary and secondary clutch springs *Works on all Arctic Cat, Polaris, Ski-doo, Yamaha, Primary and most secondary’s, Including TEAM. *Removes Arctic Cat Diamond Drive Springs *Can bolt directly to bench or fit in any standard vise Universal Spring Compressor *Removes...
For Arctic Cat clutches 2004-2015 is our Pro Mag adjustable weights that are adjustable from 58-79 grams. They have 4 positions per weight arm with easy to use magnets. This allows you to proportion the weight just the way you want it, whether you want a light or heavy tip weight. Comes with new set screws to hold them in place. The magnets weight 1.3... For Arctic Cat clutches 2004-2015 is...
Use this mounting hardware to when installing our BDX 36" spindle and A arms on your 2018-2020 Arctic Cat with piggyback shocks such as the QS3 shocks. Simply rotate the shocks from each side and use this new mounting hardware. This allows clearance for the upper A arms. Use this mounting hardware to when...
48 PACK OF MAGNETS FOR PRO MAG WEIGHTS 48 PACK OF MAGNETS FOR PRO MAG WEIGHTS
24 PACK OF MAGNETS FOR PRO MAG WEIGHTS 24 PACK OF MAGNETS FOR PRO MAG WEIGHTS
The Jaws BIG SHARK 800 pipe adds tremendous bottom end power and an easy 11-13 hp over stock on the top end with peak power at 83-8500 rpm on 2012-17 800 HO. With the power commander (and our map) plus a 2.5 degree offset timing key, the power jumps to 15-16 horsepower. COMES WITH THE PIPE, Y PIPE AND DONUT GASKET The Jaws BIG SHARK 800 pipe adds...
The Jaws BIG BORE SHARK single pipe is a must for big bore motors. Works on all big bores from 900-950cc. Expect to gain 10-15 horsepower on a big bore motor with this pipe over the stock pipe. COMES WITH THE PIPE, Y PIPE AND DONUT GASKET The Jaws BIG BORE SHARK single pipe...
Replacement oil tank that we use with our lightweight chaincase covers and belt drive kit. Can be used with other belt drive brands as well. Can be used for custom applications. Comes with a vented cap, and the outlet nipple is molded right into the bottle Replacement oil tank that we use with...
For race use only, we have teamed up with Jaws to offer these twin pipes. They are designed to run at 8600-8900 rpm depending on the porting. Each set is custom built per the application. We have Jaws adjust their pipes to our suggested tweaks for our motors. And they can be built to suit your custom porting too. For race use only, we have teamed up...