No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
New products
-
TOTAL CHAINCASE PROTECTION ARCTIC CAT / YAMAHA
Our Total Chaincase Pretection kit will prevent your chaincase to...
$99.95 -
HURRICANE ECU TUNES 998 TURBO YAMAHA / ARCTIC CAT
Included is knock protection and detection system, boost display on...
$485.00 -
HURRICANE 340 HP UPGRADE KIT SIDEWINDER / ARCTIC CAT 998 TURBO
This kit contains the basic products needed to achieve 340HP in addition...
$2,500.00 -
CLUSTER REFLASH YAMAHA / ARCTIC CAT
The Hurricane-Gap Cluster Flash for the Yamaha Sidewinder/Arctic Cat...
$255.00 -
HURRICANE LAUNCH CONTROL YAMAHA / ARCTIC CAT
THIS IS AN OPTION TO ADD TO YOUR ECU TUNING ALONG WITH THE FLASH TO PASS...
$250.00 -
3 BAR MAP SENSOR YAMAHA / ARCTIC CAT
The 3 Bar sensor replaces the stock map sensor allowing to read up to...
$110.00 -
HURRICANE FLASH TO PASS
The Hurricane-Gap Flash to Pass Button is a dual purpose handlebar...
$199.95 -
HURRICANE FLASH COMMUNICATOR YAMAHA/ARCTIC CAT
Most commonly used when buying the bundle flashes so can change...
$500.00
800HO TWIN 2012-2017, 8000 SERIES There are 183 products.
-
ARCTIC CAT CLUTCH PULLER 2010+ AND 2007+... ARCTIC CAT CLUTCH PULLER 2010+ AND 2007+...
Top quality heavy clutch pullers for your snowmobiles. One piece design, precision machined, and heat treated for strength. This model fits all 2010 and newer models, and 2007 and newer 1000 twin and 1100 4 strokes. Also Wildcat UTVs Top quality heavy clutch pullers for...
$39.95
In Stock -
PRO-MAX 950 KIT FOR ARTIC CAT 800 PRO-MAX 950 KIT FOR ARTIC CAT 800
This kit is biggest and baddest big bore for your Arctic Cat 800HO. Developed for 2010-2017 model 800HO Arctic cats. The is a complete top end replacement kit that includes two new cast and nicasil plated PRO-MAX cylinders, pistons, pro lite exhaust valves, billet head cover, domes, gaskets and O-rings. This kit is biggest and baddest big...
$1,995.00
In Stock -
900 BIG BORE KIT FOR ARTIC CAT 900CC-RACE... 900 BIG BORE KIT FOR ARTIC CAT 900CC-RACE...
The 900 stealth big bore has been working unreal for years now! It is a proven winner! We bore out the cylinders, do a full porting job them, then re nikasil plate them. We have two versions, a mountain version with a high altitude combustion chamber cnc machined into the stock head. Or for flat land riding the lower compression ratio, both designed... The 900 stealth big bore has been...
$1,795.00
In Stock -
ARCTIC CAT 800HO STAINLESS STEEL Y PIPE... ARCTIC CAT 800HO STAINLESS STEEL Y PIPE...
SSI manifolds are a simple bolt on item that makes horsepower. Our new Arctic Cat version it a torque monster! We made a recent dyno session at Dynotech Research to prove it. This manifold not only made great peak horsepower gains, it also had a crazy amount of mid range horsepower gains too. They are made of stainless steel and polished for the highest... SSI manifolds are a simple bolt on...
$169.95
In Stock -
50MM THROTTLE BODIES FOR CAT 800 50MM THROTTLE BODIES FOR CAT 800
Pro-Lite 50mm throttle bodies to replace the stock 46mm throttle bodies. 3-4 hp gain over the stock throttle bodies expecially on a ported or big bore motor. Lighter than stock. All of your stock fuel injectors, throttle linkage and tps sensor will swap over. For best results use M1000 intake boots or Boyesen Reeds part number RAD52-2 Pro-Lite 50mm throttle bodies to...
$449.95
In Stock -
52MM THROTTLE BODIES FOR CAT 800/700 52MM THROTTLE BODIES FOR CAT 800/700
Pro-Lite 52mm throttle bodies to replace the stock 46mm throttle bodies. 4-5 hp gain over the stock throttle bodies expecially on a ported or big bore motor. Lighter than stock. All of your stock fuel injectors, throttle linkage and tps sensor will swap over. For best results use M1000 intake boots or Boyesen Reeds part number RAD56-2 Pro-Lite 52mm throttle bodies to...
$469.95
In Stock -
ARCTIC CAT 800 MOUNTAIN SERIES PRO COOL HEAD ARCTIC CAT 800 MOUNTAIN SERIES PRO COOL HEAD
Our mountain series billet heads bolt on some serious power for your Arctic Cat 800 motor. It is designed to run on premium pump gas when ran above 4000 ft altitude. Huge torque gains to provide the grunt you need and want for boondocking and climbing. Much quicker throttle response! 7-8 horsepower peak and 8-10 horsepower in the mid range! These heads... Our mountain series billet heads bolt...
$399.95
In Stock -
ARCTIC CAT 800 PRO COOL BILLET HEAD ARCTIC CAT 800 PRO COOL BILLET HEAD
PRO-COOL billet heads bolt on some serious power for your snowmobile. The low altitude versions provide extra cooling capacity; they look great, and bolt on power. They add 4-5 peak horsepower with a lot of mid-range grunt too. PRO-COOL heads run on premium pump gas, 91 or higher octane. This high quality machined kit comes with a billet head cover and... PRO-COOL billet heads bolt on some...
$399.95
In Stock -
Pro-Lite Aluminum Running Boards SALE!!!... Pro-Lite Aluminum Running Boards SALE!!!...
BDX Pro Lite Running boards for Arctic Cat Pro-Climb/ProCross and Yamaha SRViper and SRViper MTX. -No snow buildup -Anti slip design built right into the aluminum extrusion (stock running boards must be removed from tunnel) NORMALLY $399.95!!! SAVE $100!! BDX Pro Lite Running boards for...
$299.95
In Stock -
ARCTIC CAT 800 BOYESEN RAGE CAGES ARCTIC CAT 800 BOYESEN RAGE CAGES
BOYESEN REEDS ARE WORKING REALLY WELL IN THE NEW CAT 800HO MOTOR. DYNOTECH RESEARCH TESTED THEM AND GAINED 4 HP PEAK AND 6-8 IN THE MID RANGE. THE NEW DUAL STAGE PETAL DESIGN WORKED REALLY WELL. THE ALL ALUMINUM RAGE CAGE IS THE MOST DURABLE REED VALVE ON THE MARKET. GREAT BOLT ON POWER FOR YOUR CAT! BOYESEN REEDS ARE WORKING REALLY WELL...
$319.95
In Stock -
PRO LITE JACKSHAFT FOR 2016-17 ARCTIC CAT... PRO LITE JACKSHAFT FOR 2016-17 ARCTIC CAT...
The 2016-17 Arctic cat PROLITE version is 2.5 lbs lighter than stock. It is threaded on the end instead of using a snap ring to hold the pulley on. But it can also be used as a direct lightweight replacement for the stock shaft. It does have the snap ring grove on it too for the stock snap ring retainer. The larger diameter tube is stronger than stock... The 2016-17 Arctic cat PROLITE...
$229.95
In Stock -
HEAVY DUTY 2012-2015 ARCTIC CAT JACKSHAFT/... HEAVY DUTY 2012-2015 ARCTIC CAT JACKSHAFT/...
This heavy duty shaft has a longer spline than stock so that the upper pulley of a belt drive has more support. This helps prevent premature wear of the splines which can cause excess wobbling. It also has a bolt on the end to keep the pulley tight against the bearing to also help eliminate wobbling of the upper pulley. This heavy duty shaft has a longer...
$129.95
In Stock -
TITANIUM LIGHTWEIGHT JACKSHAFT FOR... TITANIUM LIGHTWEIGHT JACKSHAFT FOR...
This PRO-LITE titanium jackshaft is 2 lbs lighter than the stock shaft. It is a direct replacement for the stock shaft, just a lot less weight. It fits 2012-2015 model 600 and 800's. This shafts uses the 2015 style chaincase bearing, so if you have a 2012-2014 model, we also have the new bearing for only $19.95 This PRO-LITE titanium jackshaft is 2...
$379.95
In Stock -
RAGE CAGES FOR 52 & 56MM THROTTLE BODIES... RAGE CAGES FOR 52 & 56MM THROTTLE BODIES...
This valve was developed specially to be used with our larger 52 & 56 mm throttle bodies. This makes the best horsepower possible with our throttle bodies. The multi petal design produces the best throttle response and airflow. Can be used on Arctic Cat 800 model with the 52mm throttle bodies, or our 56mm throttle bodies for the 1000 models. Usually... This valve was developed specially to...
$389.95
In Stock -
Titanium Bolt 800cc Kit Titanium Bolt 800cc Kit
Now a complete engine (800cc) and chassis titanium bolt kit which gives you a 5 lb weight saving. Can be ordered as engine kit alone, chassis kit alone or complete kit. Available for all M’s and Crossfire chassis. These are forged grade 8 bolts. Now a complete engine (800cc) and...
$499.95
In Stock -
HEAVY DUTY JACKSHAFT FOR 2012-2014 ARCTIC... HEAVY DUTY JACKSHAFT FOR 2012-2014 ARCTIC...
Heavy duty replacement jackshaft for 2012-2014 Arctic Cats with engine reverse. Heavy duty replacement jackshaft for...
$129.95
In Stock -
ARCTIC CAT 800/8000/6000 STAINLESS STEEL... ARCTIC CAT 800/8000/6000 STAINLESS STEEL...
The SSI stainless mufflers are lightweight and powerful. A recent test session at dynotech research produced a 2 horsepower gain over stock. PRO-LITE mufflers have a deep rumble to them that is trail and mountain friendly, but you know it’s not stock with the awesome sound the canister style chamber produces. They and are polished for a top of the... The SSI stainless mufflers are...
$229.95
In Stock -
ARCTIC CAT 800/8000/6000 TITANIUM PRO LITE... ARCTIC CAT 800/8000/6000 TITANIUM PRO LITE...
The SSI TITANIUM mufflers are lightweight and powerful. A recent test session at dynotech research produced a 2 horsepower gain over stock. PRO-LITE mufflers have a deep rumble to them that is trail and mountain friendly, but you know it’s not stock with the awesome sound the canister style chamber produces. It weighs only 2.5 lbs! The SSI TITANIUM mufflers are...
$449.95
In Stock -
38'' Spindle Kit 2012-2015 Arctic Cat /... 38'' Spindle Kit 2012-2015 Arctic Cat /...
38inch front spindle kit for 2012-2015 Pro Climb and Yamaha SRviper MTX 4 Pound Weight 5'' shorter than stock spindle. Variable caster improves handling. Kit comes with two spindles, two chrome moly upper a-arms and mounting hardware. 38inch front spindle kit for...
$399.95
In Stock -
40'' Spindle Kit 2012-2015 Arctic Cat /... 40'' Spindle Kit 2012-2015 Arctic Cat /...
40'' spindle kit fits 2012-Up Arctic Car ProClimb/ProCross and SRviper MTX 4 Pound Weight Loss! 5'' shorter than stock spindle. Variable caster improves handling. Kit comes with two spindle, two chrome moly upper A-arm and mounting hardware. 40'' spindle kit fits 2012-Up Arctic...
$399.95
In Stock -
Pro-Lite Chrome Moly Swing Arm Kit... Pro-Lite Chrome Moly Swing Arm Kit...
-Lightweight and Strong Chrome Moly Swing Arm Kit for 2012-15 Arctic Cat ProClimbs 153 & 162, XF141 and Yamaha SRViper MTX 2015-Includes front arm, rear arm, and rear shock link-Saves 4 pounds over stock -Lightweight and Strong Chrome Moly...
$419.95
In Stock -
PRO-LITE CHAINCASE COVER 2012-2017 ARCTIC CAT PRO-LITE CHAINCASE COVER 2012-2017 ARCTIC CAT
Kit comes with magnesium chain case cover, dip stick to check oil and drain plug! Saving you 8 1/2lbs. Eliminates the heavy stock oil tank. Use with *Oil pump delete Kit PN# 20005* SALE PRICED AT ONLY $129.95!! NORMALLY $199.95 THESE ARE ALSO AVAILABLE WITH OUR LIGHTWEIGHT OIL TANK KITS!! Kit comes with magnesium chain case...
$129.95
In Stock -
Sale Priced! PRO-LITE Brake Rotor 2012-Up... Sale Priced! PRO-LITE Brake Rotor 2012-Up...
Lite Weight Brake Rotor for 2012 and up Arctic Cat ProClimb/ProCross and SRViper Yamaha, and Sidewinder 1 1/2lbs. less of rotating mass than stock than the stock non vented brake rotors Improved brake feel. Runs cooler. Lighter than stock sno pro brake rotor too by a half a pound (wont fit 2018+ Mountain Models, but does fit ZR, and... Lite Weight Brake Rotor for 2012 and...
$59.95
In Stock -
PRO-LITE FORGED 36" FRONT END PRO-LITE FORGED 36" FRONT END
FOR 2016-2020 Arctic Cat ProClimbs and Yamaha Viper MTX. Our 36" front end is lightweight and strong. The upper A Arms and Spindles are forged aluminum for strength. The shorter than stock spindle simply isn't in the way like the stock one. Less chance of hitting something with it too. FOR 2016-2020 Arctic Cat ProClimbs...
$399.95
In Stock -
XS822 (6000/8000 CAT) ULTIMAX XS... XS822 (6000/8000 CAT) ULTIMAX XS...
We found these belts to be the best in the industry! Top notch performance and even comes with a manufactures 1 year warranty! These belts are very flexible yet very durable. And the price is so much better than a OEM that doesn't have a warranty. FITS 2012-2017 ARCTIC CAT 800, 8000, AND 2014-2017 6000 We found these belts to be the best...
$114.95
In Stock
