No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
New products
-
CATALYST 600 BOYESEN REED VALVES
BOYESEN REEDS ARE WORKING REALLY WELL IN THE CAT 6000 MOTOR. RECENT...
USD $389.95 -
Catalyst 600 Stage 2
Get the most power out of your Catalyst with this complete kit! Our...
USD $1,879.95 -
Catalyst 600 Stage 2 Cheater
Get the most power out of your Catalyst with this complete kit that...
USD $1,699.95 -
CATALYST 600 STAGE 1
Get more power out of your Catalyst with this one simple mod! Our stage...
USD $1,049.95 -
Catalyst 600 Stage 1 Budget
Get more power out of your Catalyst with this one simple mod! Our stage...
USD $739.95 -
PRO-MAX 2 CATALYST FRONT BUMPER
New for your 2024+ Catalyst! the PROMAX Front bumper Is the ultimate...
USD $199.95
800HO TWIN 2010-2011 There are 105 products.
-
Pro-Lite Series Rear 2-Wheel Kit, Arctic... Pro-Lite Series Rear 2-Wheel Kit, Arctic...
An inexpensive 2-wheel kit that uses your stock wheels! Save 2 lbs!! Fits 1M, King Cat, M-Series and X-Fire. !!!!!141" Skids require shorter adjuster bolts and X-Fire's may require different bearing size. Bearing size is 20mm!!!! An inexpensive 2-wheel kit that uses...
USD $44.95
In Stock -
TEMP SENSOR BLOCK OFF RESISTER-ARCTIC CAT... TEMP SENSOR BLOCK OFF RESISTER-ARCTIC CAT...
Sick of your pipe sensor going bad on your machine? You can bypass the sensor with this plug in resister block off. Then you don't need to run the pipe sensor anymore. This is a lot less money than the stock sensor too. Sick of your pipe sensor going bad on...
USD $44.95
In Stock -
DIAMOND DRIVE CLUTCH BOLT AND BELT... DIAMOND DRIVE CLUTCH BOLT AND BELT...
If you are purchasing one of our 10.4 diameter clutches and you have a screw in belt adjuster, then you need to use this hardware and vented bolt kit to hold the clutch on. It will work as a replacement for all years of diamond drives. This also is what is used to adjust the belt defection. If you are purchasing one of our 10.4...
USD $54.95
In Stock -
XTREME DUTY OIL CHANGE KIT 15 OZ (09-UP... XTREME DUTY OIL CHANGE KIT 15 OZ (09-UP...
XTREME DUTY OIL CHANGE KIT 15 OZ (09-UP REVERSE CASE) XTREME DUTY OIL CHANGE KIT 15 OZ...
USD $18.95
In Stock -
SUPER LIGHT CERAMIC BRAKE ROTOR FOR... SUPER LIGHT CERAMIC BRAKE ROTOR FOR...
Ceramic lightweight brake rotor for 2004-2011 diamond drives. They are 2 lbs lighter than stock! And the brake sensitivity is improved a lot too. Make sure to order our brake pads which are required. Part number 51001 SALE SALE SALE!!! NORMALLY $249.95!! SAVE $170!! Ceramic lightweight brake rotor for...
USD $79.95
In Stock -
BRAKE PADS FOR CERAMIC BRAKE ROTOR-DIAMOND... BRAKE PADS FOR CERAMIC BRAKE ROTOR-DIAMOND...
Brake pads to be used specifically for our super lightweight ceramic brake rotor. Brake pads to be used specifically...
USD $29.95
In Stock -
XTREME CHROME MOLY FRONT END KIT 42" M... XTREME CHROME MOLY FRONT END KIT 42" M...
Lightweight and strong chrome moly A arm set for M series machines and Xfires with 42" stance. Chrome plated SAVE $100!!! Lightweight and strong chrome moly A...
USD $329.95
In Stock -
BDX SPRING TOOL FOR TORSION HELIXES BDX SPRING TOOL FOR TORSION HELIXES
Adjust your adjustable spring rate clutch with ease using the BDX Spring Tool! For all BDX/SSI helixes with adjustable spring tension end cap. The back side accepts a 1" wrench or socket to make it easy to turn. When installing our clutch kits which have the torsion spring style helix, use this tool to fit into the endcap to adjust the spring tension. Adjust your adjustable spring rate...
USD $32.95
In Stock -
Xtreme Cam Conversion Kit for Diamond Drive Xtreme Cam Conversion Kit for Diamond Drive
When converting from Fixed to and Adjustable Spring Rate Cam you need a nut, cover and screws. Here is one all in one KIT!! When converting from Fixed to and...
USD $74.95
In Stock -
07-11 M/XFIRE PRO LITE SERIES TRACK SHAFT 07-11 M/XFIRE PRO LITE SERIES TRACK SHAFT
PRO LITE SERIES LIGHTWEIGHT TRACKSHAFT FOR 07-11 M SERIES AND XFIRES. PRO LITE SERIES LIGHTWEIGHT...
USD $199.95
In Stock -
Dyno Jet Power Commander V (five) for... Dyno Jet Power Commander V (five) for...
We have been using power commanders for years. They are very precise and work extremely well. They sense true throttle position and rpm ranges to fine tune the maps. The auto tune can be added or the POD-300 gauge to monitor air fuel ratios, data logging and change to multiple maps. When you purchase from us we will put the map into it for our products... We have been using power commanders...
USD $429.95
Out of stock -
Dyno Jet POD-300 Display Dyno Jet POD-300 Display
The POD-300 is an accessory display for Dynojet devices that support DJ-CAN; including the popular Power Commander V, AutoTune, WideBand 2, and CMD. The POD-300 is an accessory display...
USD $284.95
In Stock -
POD-300 Handlebar Mount Kit, BLACK POD-300 Handlebar Mount Kit, BLACK
POD-300 Handlebar Mount Kit, BLACK POD-300 Handlebar Mount Kit, BLACK
USD $99.95
In Stock -
PCV MAP SWITCH PCV MAP SWITCH
Use this map switch to toggle between dual maps on your power commander Use this map switch to toggle between...
USD $54.95
In Stock -
DRIVE SPROCKET 8 TOOTH EXVOLUTE DRIVE SPROCKET 8 TOOTH EXVOLUTE
Track ratcheting? Old extroverts worn? Try out Xtreme 8 tooth extroverts! Fits all Diamond Drive trackshafts. 3.0 pitch. Fits Arctic Cat 2004 and newer diamond drive sleds, Arctic Cat 2012 and newer. Yamaha Viper, plus Sidewinder. Fits 1 3/4" hex shaft Track ratcheting? Old extroverts...
USD $89.95
In Stock -
Xtreme 9 Tooth Drivers 2.52" Pitch Xtreme 9 Tooth Drivers 2.52" Pitch
Old drivers worn? Try our Xtreme 9 tooth drivers! Fits all Diamond Drive trackshafts. 2.52 pitch Also fits all Arctic Cat ProCross / ProClimb, and Yamaha Sidewinder and Viper. Old drivers worn? Try our Xtreme 9...
USD $44.95
In Stock -
Xtreme 10 Tooth Drivers 2.52" Pitch Xtreme 10 Tooth Drivers 2.52" Pitch
Worn drivers? Do you have 9 tooth drivers and want more speed?? Try our Xtreme 10 tooth drivers! Fits all Diamond Drive trackshafts. 2.52 pitch Worn drivers? Do you have 9 tooth...
USD $44.95
In Stock -
BDX Lite Drive 2007-2011 with Oil Dipstick BDX Lite Drive 2007-2011 with Oil Dipstick
New for 07' - 11' M's and Crossfire is our Diamond Lite Drive system that takes off a true11 lbs (07'-08') 4lbs (09') of unwanted weight. This system completely replaces your heavy stock reverse case and comes with our new one piece light weight forged transfer and input gears. These cases have been tested up to 350 HP. Will require our longer... New for 07' - 11' M's and Crossfire...
USD $1,099.95
In Stock -
Xtreme Lite Weight Gear Set 68/52 Reverse... Xtreme Lite Weight Gear Set 68/52 Reverse...
Our one-piece forged, precision ground, liteweight gears! The transfer gears are one-piece forged (not welded as OE 04’ – 08’) with 5 window opening to provide superior splash lubrication to the rear bearings of the gears which gives you longer bearing life! Our one-piece forged, precision...
USD $364.95
In Stock -
Xtreme Lite Weight Gear Set 68/52 (1.71... Xtreme Lite Weight Gear Set 68/52 (1.71...
One-piece forged, precision ground, liteweight gears! A wide variety of ratios available, non-reverse (04, 05’, 06’ and 09’) and reverse (07’ – 08’). The transfer gears are one-piece forged (not welded as OE 04’ – 08’) with 5 window opening to provide superior splash lubrication to the rear bearings of the gears which gives you longer bearing life! One-piece forged, precision ground,...
USD $329.95
In Stock -
BDX Xtreme Lite Weight Gear Set 62/58... BDX Xtreme Lite Weight Gear Set 62/58...
Our one-piece forged, precision ground, liteweight gears! A wide variety of ratios available, non-reverse (04, 05’, 06’ and 09’) and reverse (07’ – 08’). The transfer gears are one-piece forged (not welded as OE 04’ – 08’) with 5 window opening to provide superior splash lubrication to the rear bearings of the gears which gives you longer bearing life! Our one-piece forged, precision...
USD $329.95
In Stock -
Xtreme Lite Weight Gear Set 60/60 (2.24... Xtreme Lite Weight Gear Set 60/60 (2.24...
Our one-piece forged, precision ground, liteweight gears! A wide variety of ratios available, non-reverse (04, 05’, 06’ and 09’) and reverse (07’ – 08’). The transfer gears are one-piece forged (not welded as OE 04’ – 08’) with 5 window opening to provide superior splash lubrication to the rear bearings of the gears which gives you longer bearing life! Our one-piece forged, precision...
USD $329.95
-
Xtreme Lite Weight Gear Set 57/63 (2.48... Xtreme Lite Weight Gear Set 57/63 (2.48...
Our one-piece forged, precision ground, liteweight gears! A wide variety of ratios available, non-reverse (04, 05’, 06’ and 09’) and reverse (07’ – 08’). The transfer gears are one-piece forged (not welded as OE 04’ – 08’) with 5 window opening to provide superior splash lubrication to the rear bearings of the gears which gives you longer bearing life! Our one-piece forged, precision...
USD $329.95
In Stock -
Gear Set 55/65 (2.65 Ratio) Gear Set 55/65 (2.65 Ratio)
Our one-piece forged, precision ground, liteweight gears! A wide variety of ratios available, non-reverse (04, 05’, 06’ and 09’) and reverse (07’ – 08’). The transfer gears are one-piece forged (not welded as OE 04’ – 08’) with 5 window opening to provide superior splash lubrication to the rear bearings of the gears which gives you longer bearing life! Our one-piece forged, precision...
USD $329.95
In Stock -
Xtreme Lite Weight Gear Set 60/60 Reverse... Xtreme Lite Weight Gear Set 60/60 Reverse...
Our one-piece forged, precision ground, liteweight gears!The transfer gears are one-piece forged (not welded as OE 04’ – 08’) with 5 window opening to provide superior splash lubrication to the rear bearings of the gears which gives you longer bearing life! Our one-piece forged, precision...
USD $364.95
In Stock
