No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
New products
-
205HP ULTIMATE PERFORMANCE KIT 900 ACE TURBO
This kit makes your 900 Turbo Ski Doo into a powerful yet very well...
$1,675.00 -
21 TOOTH HYVO GEAR WITH 19 TOOTH SPLINE ARCTIC CAT
21 TOOTH TOP HYVO GEAR FOR 2018+ ARCTIC CAT MOUNTAIN SLEDS WITH THE...
$24.95 -
20 TOOTH HYVO GEAR WITH 19 TOOTH SPLINE ARCTIC CAT
20 TOOTH TOP HYVO GEAR FOR 2018+ ARCTIC CAT MOUNTAIN SLEDS WITH THE...
$24.95 -
8 TOOTH 2.86 PITCH SPROCKET ARCTIC CAT
New 8 tooth 2.86 Pitch exvolute drive sprockets for Arctic cat models...
$35.00 -
SPEEDO PICK UP PLUG AND MAGNETS FOR ARCTIC CAT / YAMAHA
Speedo pickup for Arctic Cat 2012-2021 and Yamaha 2014-2021. This one...
$25.00 -
RETAINING PLATE AND SEAL FOR ARCTIC CAT
Retaining plate and seal for trackshaft on Arctic Cat 2012-2021, and...
$9.95 -
900 TURBO QRS SECONDARY CLUTCH COMPRESSION TOOL
Simple yet effective way to compress the secondary for helix and spring...
$89.95 -
600 CTEC2 ARCTIC CAT MOTOR USED
Here is a great deal on a used 600 long block motor! Comes complete as...
$1,495.00
800 TWIN 2007-2009 There are 127 products.
-
BDX Pro-Lite Series Hood Screens,... BDX Pro-Lite Series Hood Screens,...
Getting snow under your hood from the forward hood vents? Use the BDX Hood Vents! BDX Pro-Lite Series Hood Screens, 2005-2011 M SERIES AND XFIRE Getting snow under your hood from the...
$19.95
In Stock -
BDX Pro-Lite Series 9 Piece Vent Kit,... BDX Pro-Lite Series 9 Piece Vent Kit,...
Damage to your existing screens? Built you own air box? Use the Black Diamond 9 piece vent kit! Damage to your existing screens?...
$79.95
In Stock -
Pro-Lite Series Side Panel Vent Kit,... Pro-Lite Series Side Panel Vent Kit,...
Black Diamonds Pro-Lite Series Side Panel Vent Kit allows excess heat out without letting snow in!! Easy to install! Utilizing the Frogskin Material for an easy install. Simply cut out the vent openings on the side panel and the new Frogskin will stick right on. Just peel the backing off and the adhesive will hold the vents in place. Normally $59.95,... Black Diamonds Pro-Lite Series Side...
$40.00
In Stock -
Pro-Lite Series Inner Idler Wheel Kit... Pro-Lite Series Inner Idler Wheel Kit...
Want to take your front stock idlers off without abnormal hi-fax wearing? This is the kit you need. Fits 2007-2019 X-Fires and M Series. Want to take your front stock idlers...
$89.95
In Stock -
Pro-Lite Series Rear 2-Wheel Kit, Arctic... Pro-Lite Series Rear 2-Wheel Kit, Arctic...
An inexpensive 2-wheel kit that uses your stock wheels! Save 2 lbs!! Fits 1M, King Cat, M-Series and X-Fire. !!!!!141" Skids require shorter adjuster bolts and X-Fire's may require different bearing size. Bearing size is 20mm!!!! An inexpensive 2-wheel kit that uses...
$29.95
In Stock -
BDX Power Valve Plus (800cc) 2007-2017 BDX Power Valve Plus (800cc) 2007-2017
Finally a kit that you will lose 4 lbs of unwanted weight, no more misadjusted cables, broken cables, or cable routing problems when you put after market pipes on your sled and still gives you the same or better performance the factory power valves. Comes with billet valve inserts, all hardware and electronic chip. Finally a kit that you will lose 4...
$199.95
In Stock -
PRO MAX 950 BIG BORE SLEEPER KIT PRO MAX 950 BIG BORE SLEEPER KIT
Want your 800ho cat to crank out alot more horsepower with wicked torque gains and still look and sound stock? The sleeper kit allows you to run the stock pipe and throttle bodies, so you can gain huge power without spending huge money! Want your 800ho cat to crank out alot...
$2,499.00
In Stock -
PRO MAX 950 BIG BORE KIT TO THE MAX PRO MAX 950 BIG BORE KIT TO THE MAX
The TO THE MAX KIT comes with everything you need to bring the motor to maximum horsepower. PROMAX Cast Cylinders, pistons, Pro Lite Exhaust Valves, Billet Head and Domes, Gaskets and Orings, Stainless Y pipe, Ceramic Coated Pipe, Boyesen Reed Valves, 52mm Pro Lite Throttle Bodies, offset timing key, NOW INCLUDES CLUTCH KIT TOO, and Power Commander Fuel... The TO THE MAX KIT comes with...
$4,195.00
In Stock -
DIAMOND DRIVE CLUTCH BOLT AND BELT... DIAMOND DRIVE CLUTCH BOLT AND BELT...
If you are purchasing one of our 10.4 diameter clutches and you have a screw in belt adjuster, then you need to use this hardware and vented bolt kit to hold the clutch on. It will work as a replacement for all years of diamond drives. This also is what is used to adjust the belt defection. If you are purchasing one of our 10.4...
$49.95
In Stock -
XTREME DUTY OIL CHANGE KIT 12OZ (07-08... XTREME DUTY OIL CHANGE KIT 12OZ (07-08...
XTREME DUTY OIL CHANGE KIT 12OZ 07-08 REVERSE CASE, AND 4 STROKE MODELS SUCH AS 1100, AND 1100 TURBO. XTREME DUTY OIL CHANGE KIT 12OZ...
$12.95
In Stock -
XTREME DUTY OIL CHANGE KIT 15 OZ (09-UP... XTREME DUTY OIL CHANGE KIT 15 OZ (09-UP...
XTREME DUTY OIL CHANGE KIT 15 OZ (09-UP REVERSE CASE) XTREME DUTY OIL CHANGE KIT 15 OZ...
$14.95
In Stock -
5 PINION PLANETARY / REVERSE MODEL GEARCASE 5 PINION PLANETARY / REVERSE MODEL GEARCASE
5 PINION PLANETARY 07-08 2 STROKE WITH REVERSE / REVERSE MODELS 2007+ 5 PINION PLANETARY 07-08 2 STROKE...
$229.95
In Stock -
SUPER LIGHT CERAMIC BRAKE ROTOR FOR... SUPER LIGHT CERAMIC BRAKE ROTOR FOR...
Ceramic lightweight brake rotor for 2004-2011 diamond drives. They are 2 lbs lighter than stock! And the brake sensitivity is improved a lot too. Make sure to order our brake pads which are required. Part number 51001 SALE SALE SALE!!! NORMALLY $249.95!! SAVE $170!! Ceramic lightweight brake rotor for...
$79.95
In Stock -
BRAKE PADS FOR CERAMIC BRAKE ROTOR-DIAMOND... BRAKE PADS FOR CERAMIC BRAKE ROTOR-DIAMOND...
Brake pads to be used specifically for our super lightweight ceramic brake rotor. Brake pads to be used specifically...
$29.95
In Stock -
XTREME PRO LITE CHROME MOLY A ARM SET 40"... XTREME PRO LITE CHROME MOLY A ARM SET 40"...
Lightweight and strong chrome moly A arm set for M series machines and Xfires with 40" stance. Chrome plated. Lightweight and strong chrome moly A...
$399.95
In Stock -
XTREME CHROME MOLY FRONT END KIT 42" M... XTREME CHROME MOLY FRONT END KIT 42" M...
Lightweight and strong chrome moly A arm set for M series machines and Xfires with 42" stance. Chrome plated SAVE $100!!! Lightweight and strong chrome moly A...
$299.95
In Stock -
BDX SPRING TOOL, DIAMOND DRIVE AND TORSION... BDX SPRING TOOL, DIAMOND DRIVE AND TORSION...
Adjust your adjustable spring rate clutch with ease using the BDX Spring Tool! For Diamond Drives with adjustable spring tension end cap. The back side accepts a spark plug wrench socket to make it easy to turn. When installing our clutch kits which have the torsion spring style helix, use this tool to fit into the endcap to adjust the spring tension. Adjust your adjustable spring rate...
$24.95
In Stock -
Xtreme Cam Conversion Kit for Diamond Drive Xtreme Cam Conversion Kit for Diamond Drive
When converting from Fixed to and Adjustable Spring Rate Cam you need a nut, cover and screws. Here is one all in one KIT!! When converting from Fixed to and...
$59.95
In Stock -
07-11 M/XFIRE PRO LITE SERIES TRACK SHAFT 07-11 M/XFIRE PRO LITE SERIES TRACK SHAFT
PRO LITE SERIES LIGHTWEIGHT TRACKSHAFT FOR 07-11 M SERIES AND XFIRES. PRO LITE SERIES LIGHTWEIGHT...
$159.95
In Stock -
Dyno Jet Power Commander V with Ignition... Dyno Jet Power Commander V with Ignition...
We have been using power commanders for years. They are very precise and work extremely well. They sense true throttle position and rpm ranges to fine tune the maps. This version you can adjust ignition timing advance or retard at different rpms and throttle positions. When you purchase from us we will put the map into it for our products so you can... We have been using power commanders...
$469.95
In Stock -
Dyno Jet Power Commander V (five) for... Dyno Jet Power Commander V (five) for...
We have been using power commanders for years. They are very precise and work extremely well. They sense true throttle position and rpm ranges to fine tune the maps. The auto tune can be added or the POD-300 gauge to monitor air fuel ratios, data logging and change to multiple maps. When you purchase from us we will put the map into it for our products... We have been using power commanders...
$399.95
In Stock -
Auto Tune for Power Commander Auto Tune for Power Commander
This version is a "universal fit", single O2 sensor kit. It can be used on any vehicle that has a PCV installed on it. It comes with a single O2 sensor, "cut to length" sensor cable, control module, O2 sensor, one weld boss kit, a CAN connection cable, and CAN termination plug. It requires a ground and +12 volt connection to be made using the supplied... This version is a "universal fit",...
$324.95
In Stock -
Dyno Jet POD-300 Display Dyno Jet POD-300 Display
The POD-300 is an accessory display for Dynojet devices that support DJ-CAN; including the popular Power Commander V, AutoTune, WideBand 2, and CMD. The POD-300 is an accessory display...
$249.95
In Stock -
POD-300 Handlebar Mount Kit, BLACK POD-300 Handlebar Mount Kit, BLACK
POD-300 Handlebar Mount Kit, BLACK POD-300 Handlebar Mount Kit, BLACK
$99.95
In Stock -
PCV MAP SWITCH PCV MAP SWITCH
Use this map switch to toggle between dual maps on your power commander Use this map switch to toggle between...
$49.95
In Stock
