No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
New products
-
CATALYST 600 STAGE 1
Get more power out of your Catalyst with this one simple mod! Our stage...
USD $1,049.95 -
Catalyst 600 Stage 1 Budget
Get more power out of your Catalyst with this one simple mod! Our stage...
USD $739.95 -
PRO-MAX 2 CATALYST FRONT BUMPER
New for your 2024+ Catalyst! the PROMAX Front bumper Is the ultimate...
USD $259.95 -
ARCTIC CAT CATALYST PRO SHIFT CLUTCH KIT
FOR CATALYST ODELS WITH ADAPT CLUTCHES, 2024+ MODEL YEAR! INCLUDES...
USD $329.95
850 RAVE / BOONDOCKER There are 45 products.
-
QRS SECONDARY CLUTCH COMPRESSION TOOL... QRS SECONDARY CLUTCH COMPRESSION TOOL...
Simple yet effective way to compress the secondary for helix and spring removal The tool can compress the clutch with out removing the entire jackshaft. Can be used on both the inner thread and outer thread secondary. Uses a safe rubber style expandable bushing for internal threaded machines. Can install in seconds, no threading required Simple yet effective way to compress...
USD $89.95
In Stock -
P-DRIVE PRIMARY CLUTCH COMPRESSOR SKI-DOO P-DRIVE PRIMARY CLUTCH COMPRESSOR SKI-DOO
Used to compress the clutch to access the clutch weights on Ski Doo P Drive clutches. Can be used on of off the machine. Completely zinc plated for rust and corrosion prevention, made of heavy gauge steel designed for lifetime use. Designed to be used with circlip remover/installer. Used to compress the clutch to access...
USD $89.95
In Stock -
P-DRIVE CLUTCH CIRCLIP INSTALLER AND REMOVER P-DRIVE CLUTCH CIRCLIP INSTALLER AND REMOVER
Used with the ski doo p-drive compressor tool to remove or install the primary spring circlip. Made of heavy gauge steel fully machined for precision compression and eliminate binding. Fully zinc plated for lifetime use and protection against rust and corrosion Used with the ski doo p-drive...
USD $59.95
In Stock -
SKI DOO P-DRIVE CLUTCH HOLDER SKI DOO P-DRIVE CLUTCH HOLDER
Allows you to hold P-Drive primary clutch while using the P-drive clutch puller for clutch removal or installation. Designed to be used with p drive clutch puller Allows you to hold P-Drive primary...
USD $59.95
In Stock -
COMPLETE SKI DOO TOOL SERVICE KIT FOR... COMPLETE SKI DOO TOOL SERVICE KIT FOR...
Complete service tool kit for the Ski-Doo P-drive equipped models. 2017 + 850 E-tec Ski-doo 2018 + 600R E-tec Rev G4 2019 + 900 ACE Turbo *Secondary compressor 151-107 will not work on 900 ACE Turbo* Kit includes: Part # 151-111 P-drive compressor, 151-112 Circlip Remover, P-drive clutch puller, 151-114 P-drive Clutch holder, 151-106 QRS Helix... Complete service tool kit for the...
USD $399.95
In Stock -
SKI-DOO G4 PROSHIFT TORSION OVERDRIVE... SKI-DOO G4 PROSHIFT TORSION OVERDRIVE...
We are proud to offer our new Pro-Shift Torsion Overdrive Clutch Kits for the Ski Doo H4 Summit and Backcountry models for low elevation! These kits really work amazing! We have clutch kits like no other!! Utilizing our overdrive helix and torsion spring design, and our Pro-Mag weights. This kit has killer throttle response, awesome acceleration, and... We are proud to offer our new...
USD $329.95
In Stock -
SKI-DOO G4 PROSHIFT TORSION OVERDRIVE... SKI-DOO G4 PROSHIFT TORSION OVERDRIVE...
We are proud to offer our new Pro-Shift Torsion Overdrive Clutch Kits for the Ski Doo H4 Summit and Backcountry models for HIGH elevation! These kits really work amazing! We have clutch kits like no other!! Utilizing our overdrive helix and torsion spring design, and our Pro-Mag weights. This kit has killer throttle response, awesome acceleration, and... We are proud to offer our new...
USD $329.95
In Stock -
JAWS 850 SKI DOO SINGLE PIPE KIT WITH HEAT... JAWS 850 SKI DOO SINGLE PIPE KIT WITH HEAT...
The Jaws SKI-DOO 850 ETEC single pipe kit gains an impressive 14 HP over stock with power & torque gains from engagement to peak rpm! And the cool part is the pipe makes 10 more lb/ft of torque!! With Trail Porting and V force Reeds we have seen a 24-25 hp gain!! Excellent fit and finish! NO FUEL CONTROLLER REQUIRED! The Jaws SKI-DOO 850 ETEC single pipe...
USD $849.95
In Stock -
850 SKI DOO BUDGET PERFORMANCE KIT 850 SKI DOO BUDGET PERFORMANCE KIT
Our Ski Doo 850 Budget Performer Kit is a great way to pick up serious performance gains for not a lot of money. The SPI y pipe adds 5 more horsepower. Then drop 10-13 pounds of weight with either our Stainless Steel or TITANIUM mufflers. The mufflers have nice deep tone to them without being too loud. Trail friendly. The clutch kit puts the power to... Our Ski Doo 850 Budget Performer Kit...
USD $849.95
In Stock -
850 SKI DOO BUDGET MOUNTAIN PERFORMANCE KIT 850 SKI DOO BUDGET MOUNTAIN PERFORMANCE KIT
Our Ski Doo 850 Budget Performer Kit is a great way to pick up serious performance gains for not a lot of money. The SPI y pipe adds 5 more horsepower. Then drop 10-13 pounds of weight with either our Stainless Steel or TITANIUM mufflers. The mufflers have nice deep tone to them without being too loud. Trail friendly. The clutch kit puts the power to... Our Ski Doo 850 Budget Performer Kit...
USD $849.95
In Stock -
850 STAGE 2 KIT WITH JAWS PIPE AND SSI... 850 STAGE 2 KIT WITH JAWS PIPE AND SSI...
Our Speed Shop Inc. Stage 2 Kit for the Ski Doo 850 really brings them to life. It's no secret that the Jaws pipes is the best pipe on the market. It comes with a new Y pipe, and even an aluminum heat shield. But the best part is the 14 horsepower gain from just the pipe! Our Speed Shop Inc. Stage 2 Kit for...
USD $1,699.95
In Stock -
MOUNTAIN 850 STAGE 2 KIT WITH JAWS PIPE... MOUNTAIN 850 STAGE 2 KIT WITH JAWS PIPE...
Our Speed Shop Inc. Mountain Stage 2 Kit for the Ski Doo 850 Long Track models really brings them to life! It's no secret that the Jaws pipes is the best pipe on the market. It comes with a new Y pipe, and even an aluminum heat shield. But the best part is the 14 horsepower gain from just the pipe! Our Speed Shop Inc. Mountain Stage 2...
USD $1,699.95
In Stock -
JAWS 850 SUMMIT SKI DOO SINGLE PIPE KIT... JAWS 850 SUMMIT SKI DOO SINGLE PIPE KIT...
The Jaws SKI-DOO 850 ETEC single pipe kit gains an impressive 14 HP over stock with power & torque gains from engagement to peak rpm! It also gains a massive 10 lb/ft of torque!!!! With Trail Porting and V force Reeds we have seen a 24-25 hp gain!! Excellent fit and finish! NO FUEL CONTROLLER REQUIRED! The Jaws SKI-DOO 850 ETEC single pipe...
USD $849.95
In Stock -
SUMMIT QUICK SHIFT 2008-2020 SUMMIT QUICK SHIFT 2008-2020
If you have a Ski Doo Summit, Freeride, XP, XM, T3, G4, any long track from 2008 to 2020. This kit will give you killer throttle response in deep snow!! The combination of the stiffer driven spring pressure and the thrust bearing under the spring works incredible! All binding is eliminated and you will have instant power all of the time!! If you have a Ski Doo Summit,...
USD $42.95
In Stock -
850 STAGE 1 KIT WITH JAWS PIPE LOW ELEVATION 850 STAGE 1 KIT WITH JAWS PIPE LOW ELEVATION
The Jaws pipe is simply the best pipe on the market for the Ski Doo 850 producing a solid 12-14 horsepower! The pipe has amazing low end and mid range power too, not just peak power. Our clutch kits utilizes a torsion secondary spring and custom helix which allows the clutches to shift into overdrive more top speed. The Jaws pipe is simply the best pipe...
USD $1,099.95
In Stock -
850 STAGE 1 KIT WITH JAWS PIPE HIGH... 850 STAGE 1 KIT WITH JAWS PIPE HIGH...
The Jaws pipe is simply the best pipe on the market for the Ski Doo 850 producing a solid 12-14 horsepower! The pipe has amazing low end and mid range power too, not just peak power. Our clutch kits utilizes a torsion secondary spring and custom helix which allows the clutches to shift into overdrive more track speed. The Jaws pipe is simply the best pipe...
USD $1,099.95
In Stock -
P DRIVE 71-92 GRAM PRO-SHIFT WEIGHTS P DRIVE 71-92 GRAM PRO-SHIFT WEIGHTS
For the Ski-Doo P-Drive clutch is our Pro Mag adjustable weights that are adjustable from 71-92 grams. They have 4 positions per weight arm with easy to use magnets. For the Ski-Doo P-Drive clutch is our...
USD $164.95
In Stock -
AXLE REMOVAL TOOL SKI DOO G4 CLUTCHES AXLE REMOVAL TOOL SKI DOO G4 CLUTCHES
Used to service PDrive clutches on MXZ 600 RS race models 2016 and newer and 850 models 2017 and newer Used to remove and service the PDrive rollers, torque rollers and the ramp/pivot assembly (weights and weight pin). Replaces OE Ski-Doo part number 529-036-372 Removing Axle Tool Used to service PDrive clutches on...
USD $14.99
In Stock -
SKIDOO QRS JACKSHAFT REMOVAL TOOL SKIDOO QRS JACKSHAFT REMOVAL TOOL
When working on the secondary clutch, the clutch and jack shaft are 1 (one) piece. This means that the clutch/jack shaft must be removed from the sled so the back of the clutch can be reached in order to take the clutch apart for maintenance or to install a clutch kit. In order to do this WITHOUT this tool, the muffler, battery and chain case cover need... When working on the secondary clutch,...
USD $27.95
In Stock -
SILBER TURBO FOR SKIDOO/LYNX G4 850 SILBER TURBO FOR SKIDOO/LYNX G4 850
Silber turbo for 2017-2022 Skidoo & Lynx 850. USED LESS THAN 50 MILES before it was returned. Kit has been checked and is in guaranteed perfect working order. Comes with BRAND NEW Charge tube, ECU reflash, BRAND NEW intake tube, BRAND NEW helix, BRAND NEW coolant lines. Springs, weight pins, air box, and throttle body adapters all show minimal wear and... Silber turbo for 2017-2022 Skidoo &...
USD $2,750.00
In Stock
