No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
New products
-
2022+ ARCTIC CAT ADAPT LOW ALTITUDE PRO SHIFT CLUTCH KIT
FOR ADAPT CLUTCHES NEW FOR ARCTIC CAT IN THE 2022 MODEL YEAR! INCLUDES...
$329.95 -
2022+ ARCTIC CAT ADAPT BACK COUNTRY LOW ALTITUDE PRO SHIFT CLUTCH KIT
FOR ADAPT CLUTCH NEW FOR ARCTIC CAT IN THE 2022 MODEL YEAR! INCLUDES...
$329.95 -
2022+ ARCTIC CAT ADAPT HIGH ALTITUDE PRO SHIFT CLUTCH KIT
FOR ADAPT CLUTCH NEW FOR ARCTIC CAT IN THE 2022 MODEL YEAR! INCLUDES...
$329.95 -
ADAPT 4-Stroke Clutch Upgrade Kit
EVERYTHING you need to replace your TEAM primary Clutch with the better...
$874.95 -
ADAPT 2-Stroke Clutch Upgrade Kit
EVERYTHING you need to replace your TEAM primary Clutch with the better...
$899.95 -
Pro-Mag Arctic Cat ADAPT Weight Set
New for 2022 Arctic Cat released the Adapt Primary clutch. This clutch...
$164.95
850 TURBO There are 15 products.
-
SKI DOO 850 TURBO STAINLESS MUFFLER SKI DOO 850 TURBO STAINLESS MUFFLER
Our Stainless muffler for the Ski Doo 850 is light and powerful. It's made of all 16 gauge stainless steel construction with mechanical baffles. It is louder than stock but has a nice deep throaty tone to it without be obnoxious. It's not a loud straight through muffler, and it sounds great! It uses all of the oem mounting positions for a very nice... Our Stainless muffler for the Ski Doo...
$274.95
In Stock -
SKI DOO 850 TURBO TITANIUM MUFFLER SKI DOO 850 TURBO TITANIUM MUFFLER
Our Titanium muffler for the Ski Doo 850 is light and powerful. It's made of all 16 gauge Titanium construction with mechanical baffles. It is louder than stock but has a nice deep throaty tone to it without be obnoxious. It's not a loud straight through muffler, and it sounds great! It uses all of the oem mounting positions for a very nice fit an... Our Titanium muffler for the Ski Doo...
$499.95
In Stock -
SKI-DOO G4 PROSHIFT TORSION OVERDRIVE... SKI-DOO G4 PROSHIFT TORSION OVERDRIVE...
We are proud to offer our new Pro-Shift Torsion Overdrive Clutch Kits for the Ski Doo H4 Summit and Backcountry models for HIGH elevation! These kits really work amazing! We have clutch kits like no other!! Utilizing our overdrive helix and torsion spring design, and our Pro-Mag weights. This kit has killer throttle response, awesome acceleration, and... We are proud to offer our new...
$329.95
In Stock -
SKI-DOO G4 PROSHIFT TORSION OVERDRIVE... SKI-DOO G4 PROSHIFT TORSION OVERDRIVE...
We are proud to offer our new Pro-Shift Torsion Overdrive Clutch Kits for the Ski Doo H4 Summit and Backcountry models for low elevation! These kits really work amazing! We have clutch kits like no other!! Utilizing our overdrive helix and torsion spring design, and our Pro-Mag weights. This kit has killer throttle response, awesome acceleration, and... We are proud to offer our new...
$329.95
In Stock -
ECU PRO-TUNES FOR 850 TURBO ECU PRO-TUNES FOR 850 TURBO
Our custom performance maps for the Ski-Doo 850 Turbo adds additional boost throughout the entire elevation range. We also alter fuel and ignition maps for better throttle response and faster spool times. Dollar for dollar this is by far the best modification you can make to your 850 Turbo! Our custom performance maps for the...
$499.95
In Stock -
P DRIVE PRO-MAG WEIGHTS 91-112 GRAMS P DRIVE PRO-MAG WEIGHTS 91-112 GRAMS
For the Ski-Doo P-Drive clutch is our Pro Mag adjustable weights that are adjustable from 91-113 grams. This allows you to proportion the weight just the way you want it, whether you want a light or heavy tip weight. This profile works so much better than the stock clicker weights, its unbelievable! Our Pro-Mag weights pull hard and shift the clutch... For the Ski-Doo P-Drive clutch is our...
$164.95
In Stock -
SKI DOO QRS HELIXES SKI DOO QRS HELIXES
We have helixes for Ski Doo 2008+ QRS driven clutches. We have them in progressive multi angles and straight angles. If you don't see the angle you want on the drop down menu, just pick "custom" and put the special angle you want in the message section when ordering online. We have helixes for Ski Doo 2008+ QRS...
$109.95
In Stock -
AXLE REMOVAL TOOL SKI DOO G4 CLUTCHES AXLE REMOVAL TOOL SKI DOO G4 CLUTCHES
Used to service PDrive clutches on MXZ 600 RS race models 2016 and newer and 850 models 2017 and newer Used to remove and service the PDrive rollers, torque rollers and the ramp/pivot assembly (weights and weight pin). Replaces OE Ski-Doo part number 529-036-372 Removing Axle Tool Used to service PDrive clutches on...
$14.99
In Stock -
MAGNETS FOR PRO-MAG WEIGHTS 48 PACK MAGNETS FOR PRO-MAG WEIGHTS 48 PACK
48 PACK OF MAGNETS FOR PRO MAG WEIGHTS 48 PACK OF MAGNETS FOR PRO MAG WEIGHTS
$32.95
In Stock -
EXHAUST SPRING TOOL 15" PULL AND PUSH EXHAUST SPRING TOOL 15" PULL AND PUSH
EXHAUST SPRING TOOL 15" PULL AND PUSH EXHAUST SPRING TOOL 15" PULL AND PUSH
$20.99
In Stock -
SKI DOO/ LYNX CLUTCH PULLER, WITH P DRIVE... SKI DOO/ LYNX CLUTCH PULLER, WITH P DRIVE...
HEAVY DUTY CLUTCH PULLER FOR SKI DOO WITH THE P DRIVE CLUTCH. 850, 850 TURBO, 600R, 900 TURBO. ALSO THE LYNX 850 MODELS. HEAVY DUTY CLUTCH PULLER FOR SKI DOO...
$44.95
In Stock -
X1 BOOST GAUGE KOSO X1 BOOST GAUGE KOSO
Today many horsepower enthusiasts are upgrading their engine with Turbo or Supercharger. For this reason we came up with this basic X-1 Boost Gauge with warning and peak functions. Made to resist cold temperature water or dust the X-1 Boost Gauge can be adapted to any engine with turbo or supercharger. ON SALE NOW!! SAVE $20!! Today many horsepower enthusiasts are...
$198.95
In Stock -
XS821 (SKI DOO 600/800/850/900/1200)... XS821 (SKI DOO 600/800/850/900/1200)...
We found these belts to be the best in the industry! Top notch performance and even comes with a manufactures 1 year warranty! These belts are very flexible yet very durable. And the price is so much better than a OEM that doesn't have a warranty. FITS ALL SKI DOO MODELS 2008 AND NEWER 600/800/850/900/1200 We found these belts to be the best...
$174.95
In Stock -
SKIDOO QRS JACKSHAFT REMOVAL TOOL SKIDOO QRS JACKSHAFT REMOVAL TOOL
When working on the secondary clutch, the clutch and jack shaft are 1 (one) piece. This means that the clutch/jack shaft must be removed from the sled so the back of the clutch can be reached in order to take the clutch apart for maintenance or to install a clutch kit. In order to do this WITHOUT this tool, the muffler, battery and chain case cover need... When working on the secondary clutch,...
$27.95
Out of stock -
NICASIL REPLATING, DUAL BORE CYLINDER NICASIL REPLATING, DUAL BORE CYLINDER
We offer cylinder Nicasil replating for all brands of motors. Just send us your cylinder with your name, address, phone number, and the model the cylinders are from. If the cylinder requires welding, its typically an additional $50-100 Per side needed. We offer cylinder Nicasil replating...
$559.95
In Stock
