No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
New products
-
BOOST/9R BILLET PRIMARY CLUTCH COVER
P22 BOOST/9R Billet primary clutch cover replaces the stock Cast cover...
USD $219.95 -
Turbo Tunes with Flasher
We've teamed up with Ibexx to bring you the best Boosted tunes for your...
USD $799.95 -
ADAPT BILLET PRIMARY CLUTCH COVER
ADAPT Billet primary clutch cover replaces cats flimsy stock cast cover...
USD $219.95 -
Light Weight E-Start + Battery Relocation Kit
This lightweight relocation kit saves over 20 lbs, gives you more room...
USD $499.95
600R ETEC There are 21 products.
-
600R SKI DOO G4 STAINLESS PROLITE MUFFLER 600R SKI DOO G4 STAINLESS PROLITE MUFFLER
Our Prolite stainless steel muffler for the Ski Doo 600R only weighs 7.5 lbs! So its almost 10 lbs lighter than stock. It has all mechanical baffles in it and never needs to be repacked. No other modifications needed to install it. It is louder than stock but not obnoxious. I great way to lose a lot of weight for your machine with a great sound. Our Prolite stainless steel muffler...
USD $274.95
Out of stock -
600R SKI DOO G4 TITANIUM PROLITE MUFFLER 600R SKI DOO G4 TITANIUM PROLITE MUFFLER
Our Prolite Titanium muffler for the Ski Doo 600R only weighs 4 lbs! It has all mechanical baffles in it and never needs to be repacked. No other modifications needed to install it. It is louder than stock but not obnoxious. A great way to lose a lot of weight for your machine with a great sound. Our Prolite Titanium muffler for the...
USD $499.95
In Stock -
EXHAUST SPRING TOOL 15" PULL AND PUSH EXHAUST SPRING TOOL 15" PULL AND PUSH
EXHAUST SPRING TOOL 15" PULL AND PUSH EXHAUST SPRING TOOL 15" PULL AND PUSH
USD $24.95
In Stock -
MAGNETS FOR PRO-MAG WEIGHTS 48 PACK MAGNETS FOR PRO-MAG WEIGHTS 48 PACK
48 PACK OF MAGNETS FOR PRO MAG WEIGHTS 48 PACK OF MAGNETS FOR PRO MAG WEIGHTS
USD $32.95
In Stock -
MAGNETS FOR PRO-MAG WEIGHTS 24 PACK MAGNETS FOR PRO-MAG WEIGHTS 24 PACK
24 PACK OF MAGNETS FOR PRO MAG WEIGHTS 24 PACK OF MAGNETS FOR PRO MAG WEIGHTS
USD $19.95
In Stock -
SKI-DOO G4 PROSHIFT TORSION OVERDRIVE... SKI-DOO G4 PROSHIFT TORSION OVERDRIVE...
We are proud to offer our new Pro-Shift Torsion Overdrive Clutch Kits for the Ski Doo G4 MX-Z and Renegade models! These kits really work amazing! We have clutch kits like no other!! Utilizing our overdrive helix and torsion spring design, and our Pro-Mag weights. This kit has killer throttle response, awesome acceleration, and great top speed gains! We are proud to offer our new...
USD $329.95
In Stock -
2008-2020 QRS Helix Removal Tool 2008-2020 QRS Helix Removal Tool
This reversible ratcheting wrench is used to remove and install the helix. This reversible ratcheting wrench is...
USD $59.95
-
QRS SECONDARY CLUTCH COMPRESSION TOOL... QRS SECONDARY CLUTCH COMPRESSION TOOL...
Simple yet effective way to compress the secondary for helix and spring removal The tool can compress the clutch with out removing the entire jackshaft. Can be used on both the inner thread and outer thread secondary. Uses a safe rubber style expandable bushing for internal threaded machines. Can install in seconds, no threading required Simple yet effective way to compress...
USD $89.95
Out of stock -
P-DRIVE PRIMARY CLUTCH COMPRESSOR SKI-DOO P-DRIVE PRIMARY CLUTCH COMPRESSOR SKI-DOO
Used to compress the clutch to access the clutch weights on Ski Doo P Drive clutches. Can be used on of off the machine. Completely zinc plated for rust and corrosion prevention, made of heavy gauge steel designed for lifetime use. Designed to be used with circlip remover/installer. Used to compress the clutch to access...
USD $89.95
In Stock -
P-DRIVE CLUTCH CIRCLIP INSTALLER AND REMOVER P-DRIVE CLUTCH CIRCLIP INSTALLER AND REMOVER
Used with the ski doo p-drive compressor tool to remove or install the primary spring circlip. Made of heavy gauge steel fully machined for precision compression and eliminate binding. Fully zinc plated for lifetime use and protection against rust and corrosion Used with the ski doo p-drive...
USD $59.95
In Stock -
SKI DOO P-DRIVE CLUTCH HOLDER SKI DOO P-DRIVE CLUTCH HOLDER
Allows you to hold P-Drive primary clutch while using the P-drive clutch puller for clutch removal or installation. Designed to be used with p drive clutch puller Allows you to hold P-Drive primary...
USD $59.95
In Stock -
COMPLETE SKI DOO TOOL SERVICE KIT FOR... COMPLETE SKI DOO TOOL SERVICE KIT FOR...
Complete service tool kit for the Ski-Doo P-drive equipped models. 2017 + 850 E-tec Ski-doo 2018 + 600R E-tec Rev G4 2019 + 900 ACE Turbo *Secondary compressor 151-107 will not work on 900 ACE Turbo* Kit includes: Part # 151-111 P-drive compressor, 151-112 Circlip Remover, P-drive clutch puller, 151-114 P-drive Clutch holder, 151-106 QRS Helix... Complete service tool kit for the...
USD $399.95
In Stock -
SKI-DOO G4 PROSHIFT TORSION OVERDRIVE... SKI-DOO G4 PROSHIFT TORSION OVERDRIVE...
We are proud to offer our new Pro-Shift Torsion Overdrive Clutch Kits for the Ski Doo H4 Summit and Backcountry models for low elevation! These kits really work amazing! We have clutch kits like no other!! Utilizing our overdrive helix and torsion spring design, and our Pro-Mag weights. This kit has killer throttle response, awesome acceleration, and... We are proud to offer our new...
USD $329.95
In Stock -
SKI-DOO G4 PROSHIFT TORSION OVERDRIVE... SKI-DOO G4 PROSHIFT TORSION OVERDRIVE...
We are proud to offer our new Pro-Shift Torsion Overdrive Clutch Kits for the Ski Doo H4 Summit and Backcountry models for HIGH elevation! These kits really work amazing! We have clutch kits like no other!! Utilizing our overdrive helix and torsion spring design, and our Pro-Mag weights. This kit has killer throttle response, awesome acceleration, and... We are proud to offer our new...
USD $329.95
In Stock -
SUMMIT QUICK SHIFT 2008-2020 SUMMIT QUICK SHIFT 2008-2020
If you have a Ski Doo Summit, Freeride, XP, XM, T3, G4, any long track from 2008 to 2020. This kit will give you killer throttle response in deep snow!! The combination of the stiffer driven spring pressure and the thrust bearing under the spring works incredible! All binding is eliminated and you will have instant power all of the time!! If you have a Ski Doo Summit,...
USD $42.95
In Stock -
MXZ QUICK SHIFT 2008-2020 MXZ QUICK SHIFT 2008-2020
If you have a Ski Doo MXZ, MXZ-X, TNT, Blizzard, 600, 800, 850, any shorter track sled from 2008 to 2020. This kit will give you killer throttle response on the trail and in deep snow!! The combination of the stiffer driven spring pressure and the thrust bearing under the spring works incredible! All binding is eliminated and you will have instant... If you have a Ski Doo MXZ, MXZ-X,...
USD $42.95
In Stock -
P DRIVE 71-92 GRAM PRO-SHIFT WEIGHTS P DRIVE 71-92 GRAM PRO-SHIFT WEIGHTS
For the Ski-Doo P-Drive clutch is our Pro Mag adjustable weights that are adjustable from 71-92 grams. They have 4 positions per weight arm with easy to use magnets. For the Ski-Doo P-Drive clutch is our...
USD $164.95
In Stock -
AXLE REMOVAL TOOL SKI DOO G4 CLUTCHES AXLE REMOVAL TOOL SKI DOO G4 CLUTCHES
Used to service PDrive clutches on MXZ 600 RS race models 2016 and newer and 850 models 2017 and newer Used to remove and service the PDrive rollers, torque rollers and the ramp/pivot assembly (weights and weight pin). Replaces OE Ski-Doo part number 529-036-372 Removing Axle Tool Used to service PDrive clutches on...
USD $14.99
In Stock -
XS821 (SKI DOO 600/800/850/900/1200)... XS821 (SKI DOO 600/800/850/900/1200)...
We found these belts to be the best in the industry! Top notch performance and even comes with a manufactures 1 year warranty! These belts are very flexible yet very durable. And the price is so much better than a OEM that doesn't have a warranty. FITS ALL SKI DOO MODELS 2008 AND NEWER 600/800/850/900/1200 We found these belts to be the best...
USD $174.95
In Stock -
NICASIL REPLATING, SINGLE CYLINDER NICASIL REPLATING, SINGLE CYLINDER
We offer cylinder Nicasil replating for all brands of motors. Just send us your cylinder with your name, address, phone number, and the model the cylinders are from. Standard replating is $259.95 per hole. If the cylinder requires welding, its typically an additional $50-100. We offer cylinder Nicasil replating...
USD $279.95
In Stock -
NICASIL REPLATING, DUAL BORE CYLINDER NICASIL REPLATING, DUAL BORE CYLINDER
We offer cylinder Nicasil replating for all brands of motors. Just send us your cylinder with your name, address, phone number, and the model the cylinders are from. If the cylinder requires welding, its typically an additional $50-100 Per side needed. We offer cylinder Nicasil replating...
USD $559.95
In Stock
