Save yourself the headache of worn out Lower A-Arms. ALL Catalysts, no...
Direct replacement for 2024+ Catalyst models, Utilizes factory seat...
Send in your Shocks for Rebuild and kick yourself for not doing it...
Send in your Shocks for ZERO wait, in stock, ready to ship. This valve...
858 ADAPT Billet primary clutch cover replaces cats flimsy stock cast...
Our Billet Head kits are an easy way to bolt on some easy horsepower, and much better cooling! The Mountain Series billet heads add 3-4 hp over stock and 4-5 in the mid range. Noticeably more low end and mid range punch and torque. The motor will have quicker throttle response too Our Billet Head kits are an easy way...
The 450 Big Bore Kit really brings this 400's to life!! We have been doing the 900 big bore to the 800 for several years now, and they work great. The latest single cylinder version works great too! Much more low end torque and peak horsepower. The 450 Big Bore Kit really brings...
If you already have our original style of BDX 36" front end kit, with the new upper A arms and mounts, then you can upgrade to the HY-PRO version. The HY-PRO spindles are 1.25 inches taller below the lower ball joint, which provides more clearance for the lower A arms. Less chance of hitting a rock or stump with the lower A arms. If you already have our original...
Our HY-PRO PLUS front end kits are now available with custom colors. Pick what color A-Arm kit you want and also what color Spindle kit you want separately. This new Generation 2 version works with shocks of all kinds without having to relocate the upper shock mounts like our original design. This provides an easier installation, plus these A Arm... Our HY-PRO PLUS front end kits are...
All the hardware you need when narrowing your 40" or 38" arctic cat to the new 36" front suspension! Includes: 36" width tie rods (re-use stock rod ends) Rod ends for new style upper arms with shoulder bolts & nuts Shock spacer for FOX FLOAT shocks to shorten from 38" length to 36" length All the hardware you need when...
Whether you have a stock front end or our new PRO-Lite Forged front end, you can upgrade your lower A arms with these Chrome Moly versions. They are arched for extra clearance to help prevent hitting rocks and stumps. The Chrome Moly material is also very strong. The weight is about the same as stock, but better of course. Whether you have a stock front end or...
The SSI stainless mufflers are lightweight and powerful. A recent test session at dynotech research produced a 2 horsepower gain over stock. PRO-LITE mufflers have a deep rumble to them that is trail and mountain friendly, but you know it’s not stock with the awesome sound the canister style chamber produces. The SSI stainless mufflers are...
The SSI TITANIUM mufflers are lightweight and powerful. A recent test session at dynotech research produced a 2 horsepower gain over stock. PRO-LITE mufflers have a deep rumble to them that is trail and mountain friendly, but you know it’s not stock with the awesome sound the canister style chamber produces. It weighs only 2.5 lbs! The SSI TITANIUM mufflers are...
Super Lite Weight Brake Rotor for 2012 and up Arctic Cat ProClimb, Procross, and Blast. Also Yamaha SRViper, Sidewinder, and Venom. FITS 2024 CATALYST RXC Over 2.5lbs. less of rotating mass than the stock solid brake rotors Improved brake feel. Runs cooler. lighter than stock vented sno pro style brake rotor by 1.15 lbs!!! Super Lite Weight Brake Rotor for...
This lightweight chaincase cover and oil tank kit is for 2014 and newer 600 Ctec2 models, and 2018 and newer Ctec2 800 models. This version is for the shorter chaincase on models such as ZR, Cross Country, High Country, and Riot. Also the Blast and Venom 400. This lightweight chaincase cover and...
EXHAUST SPRING TOOL 15" PULL AND PUSH EXHAUST SPRING TOOL 15" PULL AND PUSH
Increase the tunnel to ground clearance for improved deep snow traction. It will also provide the machine with less ski pressure for easier rideability. Also, when upgrading to the taller Hy-Pro front end kits, this Hy-Lift kit is highly recommended to equal out the ride heights of the machine. Increase the tunnel to ground...
Our BDX tie rod is stronger than the oem tie rods. It has a larger diameter tube, yet still has the flats machined in it so you put a wrench on to adjust. A great option for your 2016 and newer Arctic Cat mountain sled or Yamaha MountainMax800 with factory 36 inch stance. Our BDX tie rod is stronger than the...
Check out our Billet Brake Levers for the New Arctic Cat and Yamaha snowmobiles! CNC machined and then powder coated to match, or get a natural aluminum one. A direct replacement for the stock plastic lever, which breaks quite easily!! Our design is perfect for 1, 2 and 3 finger riders! Fits 2019+ Cats, 2021+ Yamaha Check out our Billet Brake Levers for...
A great way to shed some unwanted pounds from your machine. Machined in house out of 6061 Billet Aluminum, this is a direct replacement for the stock steel recoil basket shedding nearly 1/3 lb. of rotating mass. An easy, cost effective way to shed some unwanted weight and help increase throttle response at an even better price! A great way to shed some unwanted...
A direct replacement for a fraction of the price. This pipe sensor identical to the 2011-current Arctic Cat OEM Pipe Temp Sensor that is known to be prone to failure. Why block it off when you can have a working sensor for a fraction of the price! A direct replacement for a fraction...
PROLITE Xtreme Lightweight Fuel Tank Backcountry Edition ProClimb. Direct replacement for 2012-2013 models, and 2014-2017 use our ProLite Seats 2.5 Gallon more capacity than 2012-2013 1.5 Gallon more capacity than 2014-2017 6lbs. Lighter than stock tank. 13 Gallon capacity PROLITE Xtreme Lightweight Fuel Tank...
PROLITE Xtreme Lightweight Fuel Tank Backcountry Edition ProClimb. SEMI-TRANSPARENT Direct replacement for 2012-2013 models, and 2014-2017 use our ProLite Seats CAN BE USED ON 2018-2019 MODELS TOO WITH USE OF OUR SEATS. CALL FOR DETAILS ON INSTALLATION 2.5 Gallon more capacity than 2012-2013 1.5 Gallon more capacity than 2014-2017 6lbs. Lighter... PROLITE Xtreme Lightweight Fuel...
We offer cylinder Nicasil replating for all brands of motors. Just send us your cylinder with your name, address, phone number, and the model the cylinders are from. Standard replating is $259.95 per hole. If the cylinder requires welding, its typically an additional $50-100. We offer cylinder Nicasil replating...
Lightweight mountain seat provides improved comfort and function1-inch narrower and 1-inch taller than the standard seat PERFECT FOR YOUR ASCENDER SLED OR UPGRADED WITH OUR ASCENDER HOOD KIT!! Lightweight mountain seat provides...
Wristpin needle bearing for ALL Arctic Cat 800 models 2007-CURRENT 700 Models 2003-2006 Wristpin needle bearing for ALL...
EVERYTHING you need to replace your TEAM primary Clutch with the better performing, lighter, narrower ADAPT Clutch! Now with our Updated HEAVY DUTY Roller Bushings Installed! Direct Upgrade for all 2016+ Team BOSS Secondary Clutches Kit includes: 0746-933 ADAPT Clutch Pro-Mag Adjustable weights Titanium Clutch Bolt & washer EVERYTHING you need to replace your...
C3 SyncroDrive for the 2012-15 Arctic Cat 800 Proclimb / ProCross. You will have the following benefits from this system. 1250 Grams (2.75 lb) less rotating mass 12 lb weight savings (18 lb with oil delete) Currently available in Gear Ratios from 1.50 to 2.63 No break in period Gear and belt changes in minutes Inexpensive 8mm pitch belts... C3 SyncroDrive for the 2012-15 Arctic...
Sealed Jackshaft bearings for chaincase and clutch sides on all 2012-current 23 arctic cat models Sealed Jackshaft bearings for...
19 TOOTH HYVO ARCTIC CAT GEARS, fits all 2012- current models with 13 wide HYVO chain and small 19 Spline jackshaft, will not for 2018+ models with larger splined hollow shaft Normal Price $22.99 Our Price $21.95 19 TOOTH HYVO ARCTIC CAT GEARS, fits...