No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
New products
-
CATALYST 600 STAGE 1
Get more power out of your Catalyst with this one simple mod! Our stage...
USD $1,049.95 -
Catalyst 600 Stage 1 Budget
Get more power out of your Catalyst with this one simple mod! Our stage...
USD $739.95 -
PRO-MAX 2 CATALYST FRONT BUMPER
New for your 2024+ Catalyst! the PROMAX Front bumper Is the ultimate...
USD $259.95 -
ARCTIC CAT CATALYST PRO SHIFT CLUTCH KIT
FOR CATALYST ODELS WITH ADAPT CLUTCHES, 2024+ MODEL YEAR! INCLUDES...
USD $329.95
KING CAT, THUNDERCAT AND 9000 TURBO MODELS There are 69 products.
-
998 TURBO ALUMINUM CHARGE TUBES 998 TURBO ALUMINUM CHARGE TUBES
Our aluminum charge tube kits dissipates heat much better than the oem rubber charge tubes do. Less heat means more horsepower!! They won't balloon under higher boost levels either. The strong stainless steel clamps prevent the tubes from coming off under higher boost levels as well. Our aluminum charge tube kits...
USD $209.95
In Stock -
300HP MULTI-STAGE KIT - THUNDERCAT 9000 300HP MULTI-STAGE KIT - THUNDERCAT 9000
This powerful kit will gain up to 100 horsepower over stock and still run on 91-93 OCTANE!!! And its fully adjustable on the dash! Get your THUNDERCAT 9000 tuned up to the Max! Just send us your ecu and speedo gauge for a quick Hurricane reflash for both, and then install our awesome stainless steel muffler, aluminum charge tubes, turbosmart valve, 3... This powerful kit will gain up to 100...
USD $2,349.95
In Stock -
INNER CHAINCASE PROTECTION (with BDX... INNER CHAINCASE PROTECTION (with BDX...
Our Inner Chaincase Protection kit will prevent your chaincase to getting wrecked from impacting something such as rock or log. With the factory drop and roll chaincases protruding below the bellypan, they are very susceptible to impact, which will destroy the case and leave you stranded!! Our Inner Chaincase Protection kit...
USD $64.95
In Stock -
BILLET BRAKE LEVER ARCTIC CAT/YAMAHA... BILLET BRAKE LEVER ARCTIC CAT/YAMAHA...
Check out our Billet Brake Levers for the New Arctic Cat and Yamaha snowmobiles! CNC machined and then powder coated to match, or get a natural aluminum one. A direct replacement for the stock plastic lever, which breaks quite easily!! Our design is perfect for 1, 2 and 3 finger riders! Fits 2019+ Cats, 2021+ Yamaha, and all Polaris Matryx Models! Check out our Billet Brake Levers for...
USD $54.95
In Stock -
HURRICANE ECU TUNES, STOCK MUFFLER 998... HURRICANE ECU TUNES, STOCK MUFFLER 998...
Included is knock protection and detection system, boost display on cluster and fastest spooling in the industry for instant throttle response. Designed to run with stock Injectors, Diverter Valve, and Map Sensor. *Though the TurboSmart Diverter valve is recommended if you plan to run 240 or 270 hp tunes. Included is knock protection and...
USD $429.95
In Stock -
41 TOOTH HYVO GEAR 41 TOOTH HYVO GEAR
41 TOOTH HYVO LOWER GEAR FOR ARCTIC CAT 41 TOOTH HYVO LOWER GEAR FOR ARCTIC CAT
USD $99.95
In Stock -
38 TOOTH HYVO GEAR 38 TOOTH HYVO GEAR
38 TOOTH HYVO LOWER GEAR FOR ARCTIC CAT A GREAT UPGRADE FOR THE ZR 8000 MODELS FOR MORE TOP SPEED. USE WITH A 84 PITCH HYVO CHAIN AND YOUR STOCK 21 TOP GEAR. 21-38 38 TOOTH HYVO LOWER GEAR FOR ARCTIC...
USD $99.95
In Stock -
49 TOOTH HYVO GEAR ARCTIC CAT/YAMAHA 49 TOOTH HYVO GEAR ARCTIC CAT/YAMAHA
49 Tooth Hyvo Gear for the Arctic Cat models 2012 and newer, and Yamaha models in the Arctic Cat chassis 2014 and newer. Hyvo gears started oem in 2016, so older models need the Hyvo chain and top gear as well. The steel gears are lightened up and are extremely strong. Unlike the oem Aluminum lower gear common on mountain models. 49 Tooth Hyvo Gear for the Arctic Cat...
USD $99.95
In Stock -
48 TOOTH HYVO GEAR ARCTIC CAT/YAMAHA 48 TOOTH HYVO GEAR ARCTIC CAT/YAMAHA
48 Tooth Hyvo Gear for the Arctic Cat models 2012 and newer, and Yamaha models in the Arctic Cat chassis 2014 and newer. Hyvo gears started oem in 2016, so older models need the Hyvo chain and top gear as well. The steel gears are lightened up and are extremely strong. Unlike the oem Aluminum lower gear common on mountain models. 48 Tooth Hyvo Gear for the Arctic Cat...
USD $99.95
In Stock -
HURRICANE ECU TUNES HIGH ELEVATION WITH... HURRICANE ECU TUNES HIGH ELEVATION WITH...
Included is knock protection and detection system, boost display on cluster and fastest spooling in the industry for instant throttle response. Designed to run with stock Injectors, Diverter Valve, and Map Sensor. *Though the TurboSmart Diverter valve is recommended if you plan to run 270 Included is knock protection and...
USD $539.95
In Stock -
HURRICANE 998 TURBO STAINLESS HEADER HURRICANE 998 TURBO STAINLESS HEADER
This header is used in various applications and tunes. It gives more torque and power which allow you to run less boost to achieve the same power. It does help acceleration of course from the added torque. This header is used in various...
USD $879.95
In Stock -
XXX REAR BUMPER WITH LED TAIL LIGHT XXX REAR BUMPER WITH LED TAIL LIGHT
Check out our new extruded XXX framed rear bumper with led tail light for the Arctic Cat and Yamaha mountain sleds! This new bumper is like no other! The XXX side frames of the aluminum bumper is extruded and then machined to the correct shapes. The design with the three X's provides tremendous added strength to the tunnel. Check out our new extruded XXX framed...
USD $284.95
In Stock -
240 HORSEPOWER KIT - THUNDER CAT 9000 240 HORSEPOWER KIT - THUNDER CAT 9000
This simple kit will gain 40+ horsepower over stock and still run on 87 OCTANE!!! Get your Thundercat just and get great fuel economy too! Just send us your ecu for a quick reflash, and then install our awesome new BIG FLOW 3" stainless steel muffler and clutch kit. This simple kit will gain 40+...
USD $1,299.95
In Stock -
BDX TIE ROD FOR ARCTIC CAT / YAMAHA 36"... BDX TIE ROD FOR ARCTIC CAT / YAMAHA 36"...
Our BDX tie rod is stronger than the oem tie rods. It has a larger diameter tube, yet still has the flats machined in it so you put a wrench on to adjust. A great option for your 2016 and newer Arctic Cat mountain sled or Yamaha MountainMax800 with factory 36 inch stance. Our BDX tie rod is stronger than the...
USD $16.95
In Stock -
270 HORSEPOWER KIT - THUNDER CAT 9000 270 HORSEPOWER KIT - THUNDER CAT 9000
This powerful kit will gain 65-70 horsepower over stock and still run on 91 OCTANE!!! Get your Thundercat ripping and get great fuel economy too! Just send us your ecu for a quick reflash, and then install our awesome new BIG FLOW 3" stainless steel muffler, aluminum charge tubes, turbosmart valve, and our SSI clutch kit. This powerful kit will gain 65-70...
USD $1,679.95
In Stock -
300HP MULTI STAGE KIT - THUNDER CAT 9000 300HP MULTI STAGE KIT - THUNDER CAT 9000
This powerful kit will gain up to 100 horsepower over stock and still run on 91-93 OCTANE! And its fully adjustable on the dash! Get your THUNDERCAT 9000 tuned up to the Max! Just send us your ecu and speedo gauge for a quick Hurricane reflash, and then install our awesome new BIG FLOW stainless steel muffler, aluminum charge tubes, turbosmart valve, 3... This powerful kit will gain up to 100...
USD $2,049.95
In Stock -
ADAPT 4-Stroke Clutch Upgrade Kit ADAPT 4-Stroke Clutch Upgrade Kit
EVERYTHING you need to replace your TEAM primary Clutch with the better performing, lighter, narrower ADAPT Clutch! Now with our Updated HEAVY DUTY Roller Bushings Installed! Works with all 2016+ Team BOSS Secondary Clutches Fits all models with 30mm Crank Tapers Kit includes: 0746-934 ADAPT Clutch Pro-Mag Adjustable weights EVERYTHING you need to replace your...
USD $924.95
In Stock -
Kingcat/Sidewinder MTX Syncrodrive for... Kingcat/Sidewinder MTX Syncrodrive for...
The belt drives are less friction, less weight and much more efficient than the factory steel gears. Lose massive amounts of weight, Reverse will be Removed Gear Ratios from 1.51 to 2.63 Over 11 LBS of lost rotational weight Over 13 LBS of static weight Lost Available in 11 different gear ratios No break in period Install Takes approx. 3 Hours... The belt drives are less friction,...
USD $1,159.95
In Stock -
HELIXES FOR ARCTIC CAT TEAM BOSS CLUTCH HELIXES FOR ARCTIC CAT TEAM BOSS CLUTCH
For all Arctic cats with the TEAM BOSS Secondary (2016-21) We have them in multi angles and straight angles. If you don't see the angle you want on the drop down menu, just pick "custom" and put the special angle you want in the message section when ordering online. We make these in house so that you can get exactly what you need all of the time!... For all Arctic cats with the TEAM...
USD $109.95
In Stock
