No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
New products
-
-
21-38 HYVO CHAIN AND GEARS
21-38 HYVO CHAIN AND GEAR SET. COMMON UPGRADE ON ZR8000 MODELS FOR MORE...
$276.95 -
38 TOOTH HYVO GEAR
38 TOOTH HYVO LOWER GEAR FOR ARCTIC CAT A GREAT UPGRADE FOR THE ZR 8000...
$108.00 -
-
21-41 HYVO CHAIN AND GEARS
21-41 HYVO CHAIN AND GEAR SET. COMMON UPGRADE ON THE RIOT AND HIGH...
$262.95 -
HYVO CHAIN 84 PITCH 13 LINK WIDE
HYVO CHAIN 84 PITCH 13 LINK WIDE HYVO CHAINS HAVE LARGER AND STRONGER...
$148.95 -
HYVO CHAIN 86 PITCH 13 LINK WIDE
HYVO CHAIN 86 PITCH 13 LINK WIDE HYVO CHAINS HAVE LARGER AND STRONGER...
$148.95 -
HY-PRO BILLET SPINDLE KIT 36" HYPER GREEN
Our Hy-Pro spindles add 1.5 inches of extra height in the front of your...
$899.95
5000 SERIES/ 1100 4 STROKE 2012-2017 There are 79 products.
-
38'' Spindle Kit 2012-2015 Arctic Cat /... 38'' Spindle Kit 2012-2015 Arctic Cat /...
38inch front spindle kit for 2012-2015 Pro Climb and Yamaha SRviper MTX 4 Pound Weight 5'' shorter than stock spindle. Variable caster improves handling. Kit comes with two spindles, two chrome moly upper a-arms and mounting hardware. 38inch front spindle kit for...
$399.95
In Stock -
40'' Spindle Kit 2012-2015 Arctic Cat /... 40'' Spindle Kit 2012-2015 Arctic Cat /...
40'' spindle kit fits 2012-Up Arctic Car ProClimb/ProCross and SRviper MTX 4 Pound Weight Loss! 5'' shorter than stock spindle. Variable caster improves handling. Kit comes with two spindle, two chrome moly upper A-arm and mounting hardware. 40'' spindle kit fits 2012-Up Arctic...
$399.95
In Stock -
Anti-Stab Kit 2012-Up Arctic Cat ProClimb... Anti-Stab Kit 2012-Up Arctic Cat ProClimb...
Black Diamond has developed an Anti-Stab Roller Kit. It is designed to help prevent the rail tips from stabbing through the track windows. It also eliminates the vibration produced when the rail tips click on the windows. Black Diamond has developed an...
$79.95
In Stock -
Pro-Lite Chrome Moly Swing Arm Kit... Pro-Lite Chrome Moly Swing Arm Kit...
-Lightweight and Strong Chrome Moly Swing Arm Kit for 2012-15 Arctic Cat ProClimbs 153 & 162, XF141 and Yamaha SRViper MTX 2015-Includes front arm, rear arm, and rear shock link-Saves 4 pounds over stock -Lightweight and Strong Chrome Moly...
$419.95
In Stock -
Sale Priced! PRO-LITE Brake Rotor 2012-Up... Sale Priced! PRO-LITE Brake Rotor 2012-Up...
Lite Weight Brake Rotor for 2012 and up Arctic Cat ProClimb/ProCross and SRViper Yamaha, and Sidewinder 1 1/2lbs. less of rotating mass than stock than the stock non vented brake rotors Improved brake feel. Runs cooler. Lighter than stock sno pro brake rotor too by a half a pound (wont fit 2018+ Mountain Models, but does fit ZR, and... Lite Weight Brake Rotor for 2012 and...
$59.95
In Stock -
PRO-LITE FORGED 36" FRONT END PRO-LITE FORGED 36" FRONT END
FOR 2016-2020 Arctic Cat ProClimbs and Yamaha Viper MTX. Our 36" front end is lightweight and strong. The upper A Arms and Spindles are forged aluminum for strength. The shorter than stock spindle simply isn't in the way like the stock one. Less chance of hitting something with it too. CURRENTLY OUT OF STOCK FOR 2016-2020 Arctic Cat ProClimbs...
$399.95
Out of stock -
XS823 (CAT 1100 TURBO AND NA) ULTIMAX XS... XS823 (CAT 1100 TURBO AND NA) ULTIMAX XS...
We found these belts to be the best in the industry! Top notch performance and even comes with a manufactures 1 year warranty! These belts are very flexible yet very durable. And the price is so much better than a OEM that doesn't have a warranty. FITS 2012-2016 1100 TURBO'S AND 1100 NATURALLY ASPIRATED MODELS We found these belts to be the best...
$124.95
In Stock -
2012-2015 1100 Proclimb / ProCross... 2012-2015 1100 Proclimb / ProCross...
These kits include everything in the 800 kit plus a lightweight 4 stroke oil tank block off plate. ALSO COMES WITH A NEW BDX JACKSHAFT. 3630 Grams (8 lb) less rotating mass, 11 lb weight savings , Currently available in Gear Ratios from 1.51 to 2.63 ELIMINATES REVERSE FOR LESS WEIGHT AND LESS FRICTION These kits include everything in the...
$1,099.95
In Stock -
PRO MAG ADJUSTABLE WEIGHTS 52-68... PRO MAG ADJUSTABLE WEIGHTS 52-68...
PRO-MAG weights are an easily adjustable weight for Arctic Cat models. They are adjustable in 1.3 gram increments so you can really fine tune your machine. They hit hard when you grab a handful of throttle, they backshift quick for improved throttle response, and they are smooth when you maintain rpm ranges. PRO-MAG weights are an easily...
$149.95
In Stock -
Pro Cross/ Pro Climb Lite Weight Drive... Pro Cross/ Pro Climb Lite Weight Drive...
Lite Weight trackshaft is 1pound less than stock trackshaft. Fit's 2012-Up ProClimb/ ProCross. Also fits Yamaha Viper and Sidewinder This shaft is very strong and has been used by several 600+ horsepower race sleds. Lite Weight trackshaft is 1pound less...
$159.95
-
Koso Wideband Air/Fuel Ratio Gauge Koso Wideband Air/Fuel Ratio Gauge
This nice back lit Wideband Air/Fuel Ratio Gauge will give you precise information on your engine. This will help you determine if your engine is running rich or lean. Very good engine tuning tool. ON SALE!! SAVE 30!! This nice back lit Wideband Air/Fuel...
$309.95
-
BDX SPRING TOOL, DIAMOND DRIVE AND TORSION... BDX SPRING TOOL, DIAMOND DRIVE AND TORSION...
Adjust your adjustable spring rate clutch with ease using the BDX Spring Tool! For Diamond Drives with adjustable spring tension end cap. The back side accepts a spark plug wrench socket to make it easy to turn. When installing our clutch kits which have the torsion spring style helix, use this tool to fit into the endcap to adjust the spring tension. Adjust your adjustable spring rate...
$24.95
In Stock -
Auto Tune for Power Commander Auto Tune for Power Commander
This version is a "universal fit", single O2 sensor kit. It can be used on any vehicle that has a PCV installed on it. It comes with a single O2 sensor, "cut to length" sensor cable, control module, O2 sensor, one weld boss kit, a CAN connection cable, and CAN termination plug. It requires a ground and +12 volt connection to be made using the supplied... This version is a "universal fit",...
$324.95
In Stock -
Dyno Jet POD-300 Display Dyno Jet POD-300 Display
The POD-300 is an accessory display for Dynojet devices that support DJ-CAN; including the popular Power Commander V, AutoTune, WideBand 2, and CMD. The POD-300 is an accessory display...
$249.95
In Stock -
POD-300 Handlebar Mount Kit, BLACK POD-300 Handlebar Mount Kit, BLACK
POD-300 Handlebar Mount Kit, BLACK POD-300 Handlebar Mount Kit, BLACK
$99.95
In Stock -
PCV MAP SWITCH PCV MAP SWITCH
Use this map switch to toggle between dual maps on your power commander Use this map switch to toggle between...
$49.95
In Stock -
DRIVE SPROCKET 8 TOOTH EXVOLUTE DRIVE SPROCKET 8 TOOTH EXVOLUTE
Track ratcheting? Old extroverts worn? Try out Xtreme 8 tooth extroverts! Fits all Diamond Drive trackshafts. 3.0 pitch. Fits Arctic Cat 2004 and newer diamond drive sleds, Arctic Cat 2012 and newer. Yamaha Viper, plus Sidewinder. Fits 1 3/4" hex shaft Track ratcheting? Old extroverts...
$49.95
In Stock -
Xtreme 9 Tooth Drivers 2.52" Pitch Xtreme 9 Tooth Drivers 2.52" Pitch
Old drivers worn? Try our Xtreme 9 tooth drivers! Fits all Diamond Drive trackshafts. 2.52 pitch Also fits all Arctic Cat ProCross / ProClimb, and Yamaha Sidewinder and Viper. Old drivers worn? Try our Xtreme 9...
$39.95
In Stock -
Xtreme 10 Tooth Drivers 2.52" Pitch Xtreme 10 Tooth Drivers 2.52" Pitch
Worn drivers? Do you have 9 tooth drivers and want more speed?? Try our Xtreme 10 tooth drivers! Fits all Diamond Drive trackshafts. 2.52 pitch Worn drivers? Do you have 9 tooth...
$39.95
In Stock -
SHOCK SPACERS 3/4" FOR FLOAT SHOCKS SHOCK SPACERS 3/4" FOR FLOAT SHOCKS
3/4" thick shock spacers for shortening the overall length of a fox float. (sold each, not as a pair) 3/4" thick shock spacers for...
$12.95
In Stock -
ARCTIC CAT HELIX 2012-2015 ARCTIC CAT HELIX 2012-2015
For 2012-2015 Arctic Cat Pro Cross and Pro Climbs. We have them in progressive multi angles and straight angles. If you don't see the angle you want on the drop down menu, just pick "custom" and put the special angle you want in the message section when ordering online. We make these in house so that you can get exactly what you need all of the time!... For 2012-2015 Arctic Cat Pro Cross...
$84.95
In Stock -
ARCTIC CAT HELIX 2012-2015 WITH TORSION... ARCTIC CAT HELIX 2012-2015 WITH TORSION...
For 2012-2015 Arctic Cat Pro Cross and Pro Climbs with torsion spring end cap. We have them in progressive multi angles and straight angles. If you don't see the angle you want on the drop down menu, just pick "custom" and put the special angle you want in the message section when ordering. We make these in house so that you can get exactly what you... For 2012-2015 Arctic Cat Pro Cross...
$119.95
In Stock -
ARCTIC CAT TORSION SECONDARY SPRINGS ARCTIC CAT TORSION SECONDARY SPRINGS
We have two different rate torsion springs. We use these I our torsion spring clutch kits for the diamond drives and 2012-2015 Arctic Cat Driven clutches. They will fit the old style stock Arctic Cat driven clutch too. We have two different rate torsion...
$19.95
In Stock -
ARCTIC CAT / POLARIS PRIMARY CLUTCH SPRINGS ARCTIC CAT / POLARIS PRIMARY CLUTCH SPRINGS
We have two different clutch springs for all Polaris drive clutches, and Arctic Cat clutches up to 2015, and three springs that work in the Arctic Cat Team drive clutch. We have two different clutch springs...
$19.95
In Stock -
1100 TURBO/7000/5000 MUFFLER FLANGE GASKET 1100 TURBO/7000/5000 MUFFLER FLANGE GASKET
Replacement flange gasket to fit both Arctic Cat and Yamaha Viper. Can be used on up to 2.5" diameter tube for aftermarket mufflers. Much stronger than the oem fiber gaskets. Fits Arctic Cat 1100 turbo, 1100 non turbo, and 5000 models, and Yamaha Viper 4 stroke. Replacement flange gasket to fit both...
$12.95
In Stock
