No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
New products
-
MUNSTER FINGER THROTTLE WITH GUARD
MUNSTER FINGER THROTTLE WITH GUARD FOR ARCTIC CAT 2012-2018 MODELS....
$120.00 -
-
Arctic Cat 2014-2016 ZR F XF M 7000 Extreme Low Pride Flyscreen Black
Arctic Cat Extreme Low Pride Flyscreen - Black Brand new, in factory...
$25.00 -
2017.5 BDX PROLITE 950 TURBO 162"
EXTREMELY CLEAN 2017.5 BDX PROLITE 950 TURBO WITH ONLY 200 MILES THIS...
$18,995.00 -
ORANGE KNEE PADS FOR 2012-2017 PROCROSS/PROCLIMB ARCTIC CAT
ORANGE AND BLACK KNEE PADS FOR 2012-2017 ARCTIC CAT PROCROSS/PROCLIMB...
$25.00 -
8000 CTEC CYLINDERS, BRAND NEW TAKE OFF
BRAND NEW TAKE OFF 8000 CTEC CYLINDERS FITS 2018-2019 MODELS NORMALLY...
$500.00 -
TRA CLUTCH BUTTON RETAINERS
TRA CLUTCH BUTTON RETAINERS Used when dis-assembling the clutch to hold...
$9.95 -
10 TOOTH EXVOLUTE 2.52 SPROCKET DRIVERS
10 TOOTH EXVOLUTE 2.52 SPROCKET DRIVERS Typically used for turbo models...
$110.95
SR VIPER There are 62 products.
-
YAMAHA CLUTCH PULLER YAMAHA CLUTCH PULLER
Top quality heavy clutch pullers for your snowmobiles. One piece design, precision machined, and heat treated for strength. Fits all YPC/YXR clutches. Top quality heavy clutch pullers for...
$39.95
In Stock -
Pro-Lite Aluminum Running Boards SALE!!!... Pro-Lite Aluminum Running Boards SALE!!!...
BDX Pro Lite Running boards for Arctic Cat Pro-Climb/ProCross and Yamaha SRViper and SRViper MTX. -No snow buildup -Anti slip design built right into the aluminum extrusion (stock running boards must be removed from tunnel) NORMALLY $399.95!!! SAVE $100!! BDX Pro Lite Running boards for...
$299.95
In Stock -
38'' Spindle Kit 2012-2015 Arctic Cat /... 38'' Spindle Kit 2012-2015 Arctic Cat /...
38inch front spindle kit for 2012-2015 Pro Climb and Yamaha SRviper MTX 4 Pound Weight 5'' shorter than stock spindle. Variable caster improves handling. Kit comes with two spindles, two chrome moly upper a-arms and mounting hardware. 38inch front spindle kit for...
$399.95
In Stock -
40'' Spindle Kit 2012-2015 Arctic Cat /... 40'' Spindle Kit 2012-2015 Arctic Cat /...
40'' spindle kit fits 2012-Up Arctic Car ProClimb/ProCross and SRviper MTX 4 Pound Weight Loss! 5'' shorter than stock spindle. Variable caster improves handling. Kit comes with two spindle, two chrome moly upper A-arm and mounting hardware. 40'' spindle kit fits 2012-Up Arctic...
$399.95
In Stock -
Anti-Stab Kit 2012-Up Arctic Cat ProClimb... Anti-Stab Kit 2012-Up Arctic Cat ProClimb...
Black Diamond has developed an Anti-Stab Roller Kit. It is designed to help prevent the rail tips from stabbing through the track windows. It also eliminates the vibration produced when the rail tips click on the windows. Black Diamond has developed an...
$79.95
In Stock -
Pro-Lite Chrome Moly Swing Arm Kit... Pro-Lite Chrome Moly Swing Arm Kit...
-Lightweight and Strong Chrome Moly Swing Arm Kit for 2012-15 Arctic Cat ProClimbs 153 & 162, XF141 and Yamaha SRViper MTX 2015-Includes front arm, rear arm, and rear shock link-Saves 4 pounds over stock -Lightweight and Strong Chrome Moly...
$419.95
In Stock -
Sale Priced! PRO-LITE Brake Rotor 2012-Up... Sale Priced! PRO-LITE Brake Rotor 2012-Up...
Lite Weight Brake Rotor for 2012 and up Arctic Cat ProClimb/ProCross and SRViper Yamaha, and Sidewinder 1 1/2lbs. less of rotating mass than stock than the stock non vented brake rotors Improved brake feel. Runs cooler. Lighter than stock sno pro brake rotor too by a half a pound (wont fit 2018+ Mountain Models, but does fit ZR, and... Lite Weight Brake Rotor for 2012 and...
$59.95
In Stock -
PRO-LITE FORGED 36" FRONT END PRO-LITE FORGED 36" FRONT END
FOR 2016-2020 Arctic Cat ProClimbs and Yamaha Viper MTX. Our 36" front end is lightweight and strong. The upper A Arms and Spindles are forged aluminum for strength. The shorter than stock spindle simply isn't in the way like the stock one. Less chance of hitting something with it too. FOR 2016-2020 Arctic Cat ProClimbs...
$399.95
In Stock -
XS825 (YAMAHA SR VIPER, SIDEWINDER)... XS825 (YAMAHA SR VIPER, SIDEWINDER)...
We found these belts to be the best in the industry! Top notch performance and even comes with a manufactures 1 year warranty! These belts are very flexible yet very durable. And the price is so much better than a OEM that doesn't have a warranty. FITS YAMAHA SR VIPER MODELS 2014 AND NEWER AND SIDEWINDER TURBO MODELS We found these belts to be the best...
$114.95
In Stock -
YAMAHA CLUTCH WEIGHT CONVERSION KIT YAMAHA CLUTCH WEIGHT CONVERSION KIT
This simple kit is designed to convert your Yamaha clutch so that it can accept the popular Polaris and Arctic Cat style weights with bushing for the pin. Our PRO-MAG weights Speed Shop Inc. has for the Yamahas come with this kit to make it easy to install the weights. The kit comes with machined spacers, pivot pins, and nuts. This simple kit is designed to...
$39.95
In Stock -
PRO MAG ADJUSTABLE WEIGHTS 52-68 GRAM-YAMAHA PRO MAG ADJUSTABLE WEIGHTS 52-68 GRAM-YAMAHA
PRO-MAG weights are an easily adjustable weight for Yamaha models. We have a variety of weight ranges to work for different horsepower ranges. They are adjustable in 1.3 gram increments so you can really fine tune your machine. There are three positions per clutch arm from the heal to the tip so you can change how the weight is distributed in the arm. PRO-MAG weights are an easily...
$179.95
In Stock -
PRO MAG ADJUSTABLE WEIGHTS 78-90 GRAM-YAMAHA PRO MAG ADJUSTABLE WEIGHTS 78-90 GRAM-YAMAHA
PRO-MAG weights are an easily adjustable weight for Yamaha models. We have a variety of weight ranges to work for different horsepower ranges. They are adjustable in 1.3 gram increments so you can really fine tune your machine. There are three positions per clutch arm from the heal to the tip so you can change how the weight is distributed in the arm. PRO-MAG weights are an easily...
$179.95
In Stock -
Koso Wideband Air/Fuel Ratio Gauge Koso Wideband Air/Fuel Ratio Gauge
This nice back lit Wideband Air/Fuel Ratio Gauge will give you precise information on your engine. This will help you determine if your engine is running rich or lean. Very good engine tuning tool. ON SALE!! SAVE 30!! This nice back lit Wideband Air/Fuel...
$309.95
In Stock -
7 TOOTH 3.0 PITCH DRIVERS FOR PROCLIMB,... 7 TOOTH 3.0 PITCH DRIVERS FOR PROCLIMB,...
WHEN YOU INSTALL A 3" LUG TRACK YOU WILL NEED THESE DRIVERS FOR CLEARANCE. FOR 2012-2017 PROCLIMB MODELS WHEN YOU INSTALL A 3" LUG TRACK YOU...
$299.95
In Stock -
ZBROZ Adjustable Coupling Bracket for... ZBROZ Adjustable Coupling Bracket for...
Finally, a simple bolt on coupling device for boosted Arcitc Cats and Yamaha SR Vipers. Simple effective and priced right. Simply turn the blocks to a new position to go from no coupling (Stock) to the available positions. Our moto for this item (Keep It Simple Stupid) give you the option of having some or no coupling with a simple adjustment. All parts... Finally, a simple bolt on coupling...
$180.00
In Stock -
Auto Tune for Power Commander Auto Tune for Power Commander
This version is a "universal fit", single O2 sensor kit. It can be used on any vehicle that has a PCV installed on it. It comes with a single O2 sensor, "cut to length" sensor cable, control module, O2 sensor, one weld boss kit, a CAN connection cable, and CAN termination plug. It requires a ground and +12 volt connection to be made using the supplied... This version is a "universal fit",...
$324.95
In Stock -
Dyno Jet POD-300 Display Dyno Jet POD-300 Display
The POD-300 is an accessory display for Dynojet devices that support DJ-CAN; including the popular Power Commander V, AutoTune, WideBand 2, and CMD. The POD-300 is an accessory display...
$249.95
In Stock -
POD-300 Handlebar Mount Kit, BLACK POD-300 Handlebar Mount Kit, BLACK
POD-300 Handlebar Mount Kit, BLACK POD-300 Handlebar Mount Kit, BLACK
$99.95
In Stock -
PYROMETER 0-1600F DEGREES-AUTOMETER PYROMETER 0-1600F DEGREES-AUTOMETER
MADE IN THE USA! Monitor your exhaust temperatures with this Autometer Pyrometer which comes with a heavy duty sensor. The sensor threads into a bung which welds to the exhaust pipe. This egt gauge can be used on both 2 and 4 stroke motors. ON SALE! NORMALLY $159.95 MORE THAN HALF OFF!!! MADE IN THE USA! Monitor your...
$75.00
In Stock -
YAMAHA HELIX YAMAHA HELIX
We can machine you any angle helix you want for your Yamaha. Just specify the angles you want when ordering and we will have it ready for you right way. Made right here in Minnesota! We can machine you any angle helix...
$84.95
In Stock -
YAMAHA HD JACKSHAFT, NO REVERSE OR FOR... YAMAHA HD JACKSHAFT, NO REVERSE OR FOR...
If you are looking to remove reverse on your Yamaha for less weight, this is the shaft that you need. It has the Yamaha spline on the clutch side, and then Arctic Cat non reverse style spline on the chaincase side. You would simply use Arctic Cat style upper sprocket. Our heavy duty jackshaft also allows you to put a C3 or other brands belt drive kit... If you are looking to remove reverse...
$129.95
In Stock -
SUPERLITE PROLITE BRAKE ROTOR FOR ARCTIC... SUPERLITE PROLITE BRAKE ROTOR FOR ARCTIC...
Super Lite Weight Brake Rotor for 2012 and up Arctic Cat ProClimb, Procross, and SRViper Yamaha, and Sidewinder Over 2.5lbs. less of rotating mass than the stock solid brake rotors Improved brake feel. Runs cooler. lighter than stock vented sno pro style brake rotor by 1.15 lbs!!! Super Lite Weight Brake Rotor for...
$109.95
In Stock -
2014-19 YAMAHA VIPER SyncroDrive 2014-19 YAMAHA VIPER SyncroDrive
THE BELT DRIVE SYSTEMS ARE MUCH LESS ROTATING WEIGHT AND MUCH LESS FRICTION THAN THE STEEL STOCK GEARS. This kit comes with a 4 stroke oil tank block off plate and one of our BDX jackshafts. 3630 Grams (8 lb) less rotating mass, 11 lb weight savings , Currently available in Gear Ratios from 1.51 to 2.63 THE BELT DRIVE SYSTEMS ARE MUCH LESS...
$1,099.95
In Stock -
PRO-LITE 36" FRONT END WITH BILLET A ARMS PRO-LITE 36" FRONT END WITH BILLET A ARMS
FOR 2016-20 Arctic Cat ProClimbs and Yamaha Viper MTX. Our 36" front end is lightweight and strong. The upper A Arms are billet aluminum and Spindles are forged aluminum. The shorter than stock spindle simply isn't in the way like the stock one. Less chance of hitting something with it too. FOR 2016-20 Arctic Cat ProClimbs and...
$599.95
In Stock -
X-2 Boost Gauge with Wideband Air/fuel... X-2 Boost Gauge with Wideband Air/fuel...
This X-2 Boost Gauge is a great tool for all horsepower enthusiast that are upgrading their engine with Turbo or Supercharger. Following many requests, we came up with a unit that combines Boost, air/fuel ratio and a temperature function who can be installed on the cooling system or the intercooler. This gauge is made to resist cold temperature, water or... This X-2 Boost Gauge is a great tool...
$449.95
In Stock
