No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
New products
-
ARS-FX 36" RMK AXYS 2019 Chromoly A-Arm Kit for Polaris
36" A arms made from high grade chrome-Moly steel for the 19 Pro RMK...
$575.00 -
USED ARCTIC CAT 2018 EARLY RELEASE SIDE PANEL RH
HARDLY USED 2018 EARLY RELEASE ASCENDER PANEL! EXCELLENT CONDITION, AT...
$100.00 -
ARCTIC CAT PRO-MAG WEIGHT 58-79 GRAMS 2004-2015
For Arctic Cat clutches 2004-2015 is our Pro Mag adjustable weights that...
$149.95 -
POLARIS PRO-MAG WEIGHT 58-79 GRAMS (Arctic Cat Pre 2004)
For Polaris clutches is our Pro Mag adjustable weights that are...
$149.95 -
Universal Spring Compressor
Universal Spring Compressor *Removes all primary and secondary clutch...
$89.95 -
-
-
800 CFI 2008-2010 There are 47 products.
-
CLUTCH PULLER FOR POLARIS CLUTCH PULLER FOR POLARIS
Top quality heavy clutch pullers for your snowmobiles. One piece design, precision machined, and heat treated for strength. This puller fit all Polaris snowmobiles 2000 and newer (non Fuji motors) and also the RZR 900, 1000, and Turbo UTV's. Top quality heavy clutch pullers for...
$39.95
In Stock -
POLARIS 800 MOUTAIN SERIES PRO COOL BILLET... POLARIS 800 MOUTAIN SERIES PRO COOL BILLET...
Our mountain series billet heads bolt on some serious power for your Polaris 800 motor. It is designed to run on premium pump gas when ran above 4000 ft altitude. Huge torque gains to provide the grunt you need and want for boondocking and climbing. Much quicker throttle response! 7-8 horsepower peak and 8-10 horsepower in the mid range! These heads... Our mountain series billet heads bolt...
$399.95
In Stock -
POLARIS 800 PRO COOL BILLET HEAD POLARIS 800 PRO COOL BILLET HEAD
PRO-COOL billet heads bolt on some serious power for your snowmobile. The low altitude versions provide extra cooling capacity; they look great, and bolt on power. They add 4-5 peak horsepower with a lot of mid-range grunt too. PRO-COOL heads run on premium pump gas, 91 or higher octane. This high quality machined kit comes with a billet head cover and... PRO-COOL billet heads bolt on some...
$399.95
In Stock -
POLARIS 800 2008-19 CFI DURABILITY KIT /... POLARIS 800 2008-19 CFI DURABILITY KIT /...
The kit comes complete with strong forged Pistons, rings, wristpins, and c clips. Our laser cut and plated spacer plate, new base gasket, longer heavy duty bolts, and cylinder guide spacers. See the full description below. Buy this kit and not only will you get the top quality MADE IN USA parts, but you get a great SALE price too! The kit comes complete with strong...
$429.95
In Stock -
V FORCE REEDS FOR POLARIS 800/600-RUBBER... V FORCE REEDS FOR POLARIS 800/600-RUBBER...
THE NEW V FORCE REEDS FOR THE POLARIS HAVE A RUBBER COATED CAGE LIKE AN OEM. THEY DID THIS TO MAKE THEM LAST AND BE VERY DURABLE. THEY ARE WORKING EXRTREMELY WELL TOO! DYNOTECH RESEARCH SHOWED A SOLID 4-6 HORSEPOWER GAIN! THEY WORKED SO GOOD THAT THEY EVEN COME STOCK IN THE AXYS 800. GREAT THROTTLE RESPONSE AND VERY DURABLE NOW TOO! A MUST HAVE EVEN... THE NEW V FORCE REEDS FOR THE POLARIS...
$258.00
In Stock -
800 POLARIS PIPE MOD 800 POLARIS PIPE MOD
OUR PIPE MODS REALLY TOOK OFF WAY BACK IN 2004 I MADE A QUICK TRIP TO DYNOTECH RESEARCH FOR SOME REALLY NICE RESULTS. IN TODAYS AGE THE POLARIS 800 IS ONE HOT SLED. WE HAVE DEVELOPED A PIPE MOD FOR A STOCK MOTOR AND ALSO A BIG BORE VERSION. A STOCK MACHINE WILL GAIN 6-7 HORSEPOWER AND 3-4 LB/FT OF TORUE IN THE MID RANGE. WE ALSO OFFER THEM FOR THE... OUR PIPE MODS REALLY TOOK OFF WAY...
$249.95
In Stock -
XS809 (REPLACES POLARIS 3211115) ULTIMAX... XS809 (REPLACES POLARIS 3211115) ULTIMAX...
We found these belts to be the best in the industry! Top notch performance and even comes with a manufactures 1 year warranty! These belts are very flexible yet very durable. And the price is so much better than a OEM that doesn't have a warranty. FOR POLARIS 600/700/800 MODELS, PRO, RUSH, SWITHBACK, AND 2017-2018 RMK600 REPLACES PART NUMBER 3211115... We found these belts to be the best...
$114.95
In Stock -
PRO MAG ADJUSTABLE WEIGHTS 52-68 GRAM-POLARIS PRO MAG ADJUSTABLE WEIGHTS 52-68 GRAM-POLARIS
PRO-MAG weights are an easily adjustable weight for Polaris models. They are adjustable in 1.3 gram increments so you can really fine tune your machine. They hit hard when you grab a handful of throttle, they backshift quick for improved throttle response, and they are smooth when you maintain rpm ranges. PRO-MAG weights are an easily...
$149.95
In Stock -
PRO MAG ADJUSTABLE WEIGHTS 78-90 GRAM-POLARIS PRO MAG ADJUSTABLE WEIGHTS 78-90 GRAM-POLARIS
PRO-MAG weights are an easily adjustable weight for Polaris models. They are adjustable in 1.3 gram increments so you can really fine tune your machine. They hit hard when you grab a handful of throttle, they backshift quick for improved throttle response, and they are smooth when you maintain rpm ranges. PRO-MAG weights are an easily...
$149.95
In Stock -
Koso Wideband Air/Fuel Ratio Gauge Koso Wideband Air/Fuel Ratio Gauge
This nice back lit Wideband Air/Fuel Ratio Gauge will give you precise information on your engine. This will help you determine if your engine is running rich or lean. Very good engine tuning tool. ON SALE!! SAVE 30!! This nice back lit Wideband Air/Fuel...
$309.95
In Stock -
KOSO Dual EGT Gauge - Fast Sensors KOSO Dual EGT Gauge - Fast Sensors
This nice dual exhaust temperature gauge will give you precious informations on your engine.The settable warning for each cylinder give the opportunity to set the maximum temperature to reach at up to 2100°F. The color change and the blinking of the screen makes it very easy to see if something is going wrong with the engine. ON SALE NOW!! SAVE $35!! This nice dual exhaust temperature...
$334.95
In Stock -
Dyno Jet Power Commander V (five) for... Dyno Jet Power Commander V (five) for...
We have been using power commanders for years. They are very precise and work extremely well. They sense true throttle position and rpm ranges to fine tune the maps. The auto tune can be added or the POD-300 gauge to monitor air fuel ratios, data logging and change to multiple maps. When you purchase from us we will put the map into it for our products... We have been using power commanders...
$399.95
In Stock -
Auto Tune for Power Commander Auto Tune for Power Commander
This version is a "universal fit", single O2 sensor kit. It can be used on any vehicle that has a PCV installed on it. It comes with a single O2 sensor, "cut to length" sensor cable, control module, O2 sensor, one weld boss kit, a CAN connection cable, and CAN termination plug. It requires a ground and +12 volt connection to be made using the supplied... This version is a "universal fit",...
$324.95
In Stock -
Dyno Jet POD-300 Display Dyno Jet POD-300 Display
The POD-300 is an accessory display for Dynojet devices that support DJ-CAN; including the popular Power Commander V, AutoTune, WideBand 2, and CMD. The POD-300 is an accessory display...
$249.95
In Stock -
POD-300 Handlebar Mount Kit, BLACK POD-300 Handlebar Mount Kit, BLACK
POD-300 Handlebar Mount Kit, BLACK POD-300 Handlebar Mount Kit, BLACK
$99.95
In Stock -
PCV MAP SWITCH PCV MAP SWITCH
Use this map switch to toggle between dual maps on your power commander Use this map switch to toggle between...
$49.95
In Stock -
PYROMETER 0-1600F DEGREES-AUTOMETER PYROMETER 0-1600F DEGREES-AUTOMETER
MADE IN THE USA! Monitor your exhaust temperatures with this Autometer Pyrometer which comes with a heavy duty sensor. The sensor threads into a bung which welds to the exhaust pipe. This egt gauge can be used on both 2 and 4 stroke motors. ON SALE! NORMALLY $159.95 MORE THAN HALF OFF!!! MADE IN THE USA! Monitor your...
$75.00
In Stock -
TEAM STYLE DRIVEN SPRINGS FOR TSS-04 AND... TEAM STYLE DRIVEN SPRINGS FOR TSS-04 AND...
We have three different spring rates for the Team driven clutches, TSS-04 and also the Tied driven. We have three different spring rates...
$19.95
In Stock -
ARCTIC CAT / POLARIS PRIMARY CLUTCH SPRINGS ARCTIC CAT / POLARIS PRIMARY CLUTCH SPRINGS
We have two different clutch springs for all Polaris drive clutches, and Arctic Cat clutches up to 2015, and three springs that work in the Arctic Cat Team drive clutch. We have two different clutch springs...
$19.95
In Stock -
LOW ALTITUDE PRO SHIFT CLUTCH KITS POLARIS... LOW ALTITUDE PRO SHIFT CLUTCH KITS POLARIS...
Clutching is the key factor to optimize the performance of your machine. Whether you have a stock or modified machine there is a lot of performance to be gained with our ProShift Clutch Kits. We have tested to produce more aggressive helix angles to provide quicker acceleration. Clutching is the key factor to...
$289.95
In Stock -
BACK COUNTRY LOW ALTITUDE PRO SHIFT... BACK COUNTRY LOW ALTITUDE PRO SHIFT...
BACK COUNTRY PRO SHIFT KITS are designed for longer track models to be run at low altitudes in deep snow. They are tuned for very quick throttle response in deep snow for off trail riding, so that you have instant power all of the time. BACK COUNTRY PRO SHIFT KITS are...
$289.95
In Stock -
MOUNTAIN SERIES PRO SHIFT CLUTCH KITS-POLARIS MOUNTAIN SERIES PRO SHIFT CLUTCH KITS-POLARIS
MOUNTAIN SERIES PRO SHIFT KITS are designed for long track models in deep snow. They are tuned for very quick throttle response in deep snow when boondocking and climbing, so that you have instant power all of the time. MOUNTAIN SERIES PRO SHIFT KITS are...
$289.95
In Stock -
NICASIL REPLATING, DUAL BORE CYLINDER NICASIL REPLATING, DUAL BORE CYLINDER
We offer cylinder Nicasil replating for all brands of motors. Just send us your cylinder with your name, address, phone number, and the model the cylinders are from. Standard dual cylinder replating is $499.95. If the cylinder requires welding, its typically an additional $50 Per side needed. We offer cylinder Nicasil replating...
$499.95
In Stock -
2010 POLARIS 800 REPLATE EXCHANGE CYLINDER 2010 POLARIS 800 REPLATE EXCHANGE CYLINDER
We have a 2010 Polaris 800 cylinders freshly replated for exchange. Just send us your cylinder with your name, address, phone number, and the model the cylinders are from. Standard dual cylinder replating is $499.95 per hole. If the cylinder requires welding, its typically an additional $50 per side needed. We have a 2010 Polaris 800 cylinders...
$499.95
In Stock -
POWER COMMANDER FC POWER COMMANDER FC
New lower priced fuel controller for your Polaris!! only $249!! Great for when you are using our pipe or pipe mod on the 800 models. New lower priced fuel controller for...
$249.95
In Stock
