Check out the newly revised PRO-TECT AIR 2.0!! Protect your engine from...
BDX has a developed a new replacement "ANTI-SLOP" steering post bushing...
We have two different rate torsion springs for our billet helix and...
BDX has a developed a new replacement "ANTI-SLOP" steering post bushing...
This simple kit supplies you with all of the roller bearings in the...
ROCK Performance Rollers are made from engineering grade plastics...
We have 3 different clutch springs for all Polaris drive clutches, and...
Super Lite Weight Brake Rotor for 2012 and up Arctic Cat ProClimb,...
No manufacturer
Turn your 858 into a rocket with this stage 2 kit! making 40+ HP...
Our stage 1 is no questions asked, the best bang for your buck in the...
PREORDER The ONLY aligned Belt drive assembly on the market for the...
Our Billet Head for the Arctic Cat 858 is an easy way to bolt on some...
Get more power out of your Catalyst with this one simple mod! Our stage...
Get more power out of your Catalyst with this one simple mod! Our stage...
Get the most power out of your Catalyst with this complete kit that...
Get the most power out of your Catalyst with this complete kit! Our...
No supplier
The belt drives are less friction, less weight and much more efficient than the factory steel gears. Lose massive amounts of weight, Reverse will be Removed Gear Ratios from 1.51 to 2.63 Over 11 LBS of lost rotational weight Over 13 LBS of static weight Lost Available in 11 different gear ratios No break in period Install Takes approx. 3 Hours... The belt drives are less friction,...
C3 SyncroDrive for the 2012-15 Arctic Cat 800 Proclimb / ProCross. You will have the following benefits from this system. 1250 Grams (2.75 lb) less rotating mass 12 lb weight savings (18 lb with oil delete) Currently available in Gear Ratios from 1.50 to 2.63 No break in period Gear and belt changes in minutes Inexpensive 8mm pitch belts... C3 SyncroDrive for the 2012-15 Arctic...
These kits include everything in the 800 kit plus a lightweight 4 stroke oil tank block off plate. ALSO COMES WITH A NEW BDX JACKSHAFT. 3630 Grams (8 lb) less rotating mass, 11 lb weight savings , Currently available in Gear Ratios from 1.51 to 2.63 Fits all 2012-2019 (non 998T) Models without the Drop/Roll Chaincase ELIMINATES REVERSE FOR... These kits include everything in the...
SyncroDrive for All the Ctec 600/800 Non Drop/Roll Models You will have the following benefits from this system. 1250 Grams (2.75 lb) less rotating mass 12 lb weight savings (18 lb with oil delete) Currently available in Gear Ratios from 1.50 to 2.63 No break in period Gear and belt changes in minutes Inexpensive 8mm pitch belts SyncroDrive for All the Ctec 600/800...
SyncroDrive for the 2016-17 Arctic Cat 800 Proclimb / ProCross. You will have the following benefits from this system. 1250 Grams (2.75 lb) less rotating mass 12 lb weight savings (18 lb with oil delete) Currently available in Gear Ratios from 1.50 to 2.63 No break in period Direct bolt on takes aprox 3 hours to install Gear and belt changes in... SyncroDrive for the 2016-17 Arctic...
THE BELT DRIVE SYSTEMS ARE MUCH LESS ROTATING WEIGHT AND MUCH LESS FRICTION THAN THE STEEL STOCK GEARS. This kit comes with a 4 stroke oil tank block off plate and one of our BDX jackshafts. 3630 Grams (8 lb) less rotating mass, 11 lb weight savings , Currently available in Gear Ratios from 1.51 to 2.63 THE BELT DRIVE SYSTEMS ARE MUCH LESS...
C3 PowerSports revolutionary new SyncroDrive system allows you to convert your heavy stock chain drive on your snowmobile to a lightweight belt drive system. Bolt-on upgrade Choose from 1.63 up to 2.63 gear ratio’s C3 PowerSports revolutionary new...
Free up wasted horsepower and feel the efficiency of the SyncroDrive on your Ski Doo G4 model. We know from experience and feedback over the past few years with the aftermarket extended chain cases, that chain maintenance is especially critical to chain life. Chains are becoming a thing of the past! Free up wasted horsepower and feel...
The Giga Torque belts are extremely strong and durable. These replacement belts work on C3, Specialty Motorsports, TKI, and Mountain Machine Belt Drives. MAKE SURE TO ORDER THE CORRECT SIZE IN THE DROP DOWN MENU WHEN ORDERING The Giga Torque belts are extremely...
Free up wasted horsepower and feel the efficiency of the SyncroDrive on your Ski Doo G4 Turbo model. We know from experience and feedback over the past few years with the aftermarket extended chain cases, that chain maintenance is especially critical to chain life. Chains are becoming a thing of the past! Free up wasted horsepower and feel...
Replacement trackshaft with drivers installed for all 2 stroke diamond drive models 2007-2011, and all 4 stroke models with diamond drive 2007 and newer. Replacement trackshaft with drivers...
PREORDER The ONLY aligned Belt drive assembly on the market for the CATALYST Chassis! This system Removes the eccentric Bearing on the belt drive, changes the jackshaft location and adds a tensioner pulley allowing 3 key features: -Truly Aligned sheaves -Easier Belt changes -Maximize Gearing Possibilities 2.63 to 1.67 Ratios Available PREORDER The ONLY aligned Belt drive...
Exclusive 05-06 M and Crossfire Lightweight Trackshaft with machined 9 tooth drivers. Full 2 pounds of rotating mass saving from stock trackshaft. Comes with all hardware to make a simple remove and replace operation. Also fits 07-up Diamond Lite Drive system for a full 11 lbs weight saving. Exclusive 05-06 M and Crossfire...
Black Diamond's Lite Weight Trackshaft reduces 2 pounds of rotating mass on the ZR. The Lite Weight Trackshaft utilizes a PATENT PENDING Slip-Washer with a shorter, higher grade bolt to replace the heavier, lower grade OEM bolt. Black Diamond's Lite Weight...
SyncroDrive for the 2018+ Arctic Cat 800/600 CTEC with Drop/Roll Chaincase You will have the following benefits from this system. 1250 Grams (2.75 lb) less rotating mass 12 lb weight savings (18 lb with oil delete) Currently available in Gear Ratios from 1.50 to 2.63 No break in period Gear and belt changes in minutes Inexpensive 8mm pitch belts SyncroDrive for the 2018+ Arctic Cat...
BDX 10.4 DIAMETER REPLACEMENT SHEAVES FOR DIAMOND DRIVE MODELS ** 2005-2006 models with the threaded adjuster need to upgrade to part number 50001-BK adjuster which isn't threaded. BDX 10.4 DIAMETER REPLACEMENT SHEAVES...
This belt is the best performing belt on the market!! This is the top of the line Ultimax Belt, they work! 3 year warranty and near half the price of a OEM belt. FITS WILDCAT AND WILDCAT X MODELS (NOT XX) This belt is the best performing belt...
Our heavy duty trackshaft is 1 lb lighter than the stock one! It is a direct replacement for the stock shaft. Add our Super Lite Brake Rotor and drop 1.5-2.5 more lbs!! 3.5 lbs of total rotating weight loss!! A great upgrade for mountain sled, drag race sleds, and trail sleds! This shaft will easily handle any horsepower!! Our heavy duty trackshaft is 1 lb...
PRO-LITE HD STEEL CATALYST TRACK SHAFT Fits all 600/858 Models Improved tolerancing fixing Premature Bearing wear and Brake Rotor Rattle 0.5 LB lighter than stock Direct OEM Replacement drivers pre-installed and machined true PRO-LITE HD STEEL CATALYST TRACK...
This belt is the best performing belt on the market!! This is the top of the line Ultimax Belt, they work! 3 year warranty and near half the price of a OEM belt. This belt is the best performing belt...
This belt is the best performing belt on the market!! This is the top of the line Ultimax Belt, they work! 3 year warranty and near half the price of a OEM belt. This belt is the best performing belt...
If you are purchasing one of our 10.4 diameter clutches and you have a screw in belt adjuster, then you need to use this hardware and vented bolt kit to hold the clutch on. It will work as a replacement for all years of diamond drives. This also is what is used to adjust the belt defection. If you are purchasing one of our 10.4...
If you are looking to remove reverse on your Yamaha for less weight, this is the shaft that you need. It has the Yamaha spline on the clutch side, and then Arctic Cat non reverse style spline on the chaincase side. You would simply use Arctic Cat style upper sprocket. Our heavy duty jackshaft also allows you to put a C3 or other brands belt drive kit... If you are looking to remove reverse...
This belt is the best performing belt on the market!! This is the top of the line Ultimax Belt, they work! 3 year warranty and near half the price of a OEM belt. FITS WILDCAT XX This belt is the best performing belt...
ULTIMAX BELTS are an extremely high quality belt!! They come with a 2 year warranty!! This models fits the Arctic Cat Sport and Trail models. ULTIMAX BELTS are an extremely high...