No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
New products
-
CATALYST 600 BOYESEN REED VALVES
BOYESEN REEDS ARE WORKING REALLY WELL IN THE CAT 6000 MOTOR. RECENT...
USD $389.95 -
Catalyst 600 Stage 2
Get the most power out of your Catalyst with this complete kit! Our...
USD $1,879.95 -
Catalyst 600 Stage 2 Cheater
Get the most power out of your Catalyst with this complete kit that...
USD $1,699.95 -
CATALYST 600 STAGE 1
Get more power out of your Catalyst with this one simple mod! Our stage...
USD $1,049.95 -
Catalyst 600 Stage 1 Budget
Get more power out of your Catalyst with this one simple mod! Our stage...
USD $739.95 -
PRO-MAX 2 CATALYST FRONT BUMPER
New for your 2024+ Catalyst! the PROMAX Front bumper Is the ultimate...
USD $199.95
Viewed products
-
STAGE 2 AXYS 800 TRAIL...
Powerful and quick acceleration with...
-
Weld-on Bushing for...
WELD ON BUSHING FOR EGT SENSORS
6000 CTEC-2 2014-2017 There are 116 products.
-
ARCTIC CAT CLUTCH PULLER 2010+ AND 2007+... ARCTIC CAT CLUTCH PULLER 2010+ AND 2007+...
Top quality heavy clutch pullers for your snowmobiles. One piece design, precision machined, and heat treated for strength. This model fits all 2010 and newer models, and 2007 and newer 1000 twin and 1100 4 strokes. Also fits: Wildcat UTVs, X and XX Yamaha MountainMax 800 2021 Top quality heavy clutch pullers for...
USD $44.95
In Stock -
ARCTIC CAT 6000 MOUNTAIN SERIES PRO COOL HEAD ARCTIC CAT 6000 MOUNTAIN SERIES PRO COOL HEAD
Our mountain series billet heads bolt on some serious power for your Arctic Cat 6000 motor. It is designed to run on premium pump gas when ran above 4000 ft altitude. Huge torque gains to provide the grunt you need and want for boondocking and climbing. Much quicker throttle response! 6-7 horsepower peak and in the mid range! These heads work extremely... Our mountain series billet heads bolt...
USD $439.95
In Stock -
ARCTIC CAT 6000 PRO COOL BILLET HEAD ARCTIC CAT 6000 PRO COOL BILLET HEAD
PRO-COOL billet heads bolt on some serious power for your snowmobile. The low altitude versions provide extra cooling capacity; they look great, and bolt on power. They add 3-4 peak horsepower with a lot of mid-range grunt too. PRO-COOL heads run on premium pump gas, 91 or higher octane. This high quality machined kit comes with a billet head cover and... PRO-COOL billet heads bolt on some...
USD $439.95
In Stock -
Pro-Lite Aluminum Running Boards SALE!!!... Pro-Lite Aluminum Running Boards SALE!!!...
BDX Pro Lite Running boards for Arctic Cat Pro-Climb/ProCross and Yamaha SRViper and SRViper MTX. -No snow buildup -Anti slip design built right into the aluminum extrusion (stock running boards must be removed from tunnel) Only a few colors left (we will not be making more) BDX Pro Lite Running boards for...
USD $349.95
Product available with different options -
PRO LITE JACKSHAFT FOR TEAM BOSS ARCTIC... PRO LITE JACKSHAFT FOR TEAM BOSS ARCTIC...
This PROLITE version is 2.5 lbs lighter than stock. It is threaded on the end instead of using a snap ring to hold the pulley on. But it can also be used as a direct lightweight replacement for the stock shaft. It does have the snap ring grove on it too for the stock snap ring retainer. The larger diameter tube is stronger than stock too. This PROLITE version is 2.5 lbs...
USD $199.95
In Stock -
HEAVY DUTY 2012-2015 ARCTIC CAT JACKSHAFT/... HEAVY DUTY 2012-2015 ARCTIC CAT JACKSHAFT/...
This heavy duty shaft has a longer spline than stock so that the upper pulley of a belt drive has more support. This helps prevent premature wear of the splines which can cause excess wobbling. It also has a bolt on the end to keep the pulley tight against the bearing to also help eliminate wobbling of the upper pulley. This heavy duty shaft has a longer...
USD $149.95
In Stock -
Anti-Stab Kit 2012-Up Arctic Cat ProClimb... Anti-Stab Kit 2012-Up Arctic Cat ProClimb...
Black Diamond has developed an Anti-Stab Roller Kit. It is designed to help prevent the rail tips from stabbing through the track windows. It also eliminates the vibration produced when the rail tips click on the windows. Black Diamond has developed an...
USD $99.95
In Stock -
Pro-Lite Chrome Moly Swing Arm Kit... Pro-Lite Chrome Moly Swing Arm Kit...
INVENTORY REDUCTION SALE!! SAVE $75!! -Lightweight and Strong Chrome Moly Swing Arm Kit for 2012-15 Arctic Cat ProClimbs 153 & 162, XF141" tracks and Yamaha SRViper MTX 2015-Includes front arm, rear arm, and rear shock link-Saves 4 pounds over stock INVENTORY REDUCTION SALE!! SAVE $75!!...
USD $419.95
In Stock -
XS822 (6000/8000 CAT) ULTIMAX XS... XS822 (6000/8000 CAT) ULTIMAX XS...
We found these belts to be the best in the industry! Top notch performance and even comes with a manufactures 1 year warranty! These belts are very flexible yet very durable. And the price is so much better than a OEM that doesn't have a warranty. FITS 2012-2017 ARCTIC CAT 800, 8000, AND 2014-2017 6000 We found these belts to be the best...
USD $184.95
In Stock -
PRO MAG ADJUSTABLE WEIGHTS 52-68... PRO MAG ADJUSTABLE WEIGHTS 52-68...
PRO-MAG weights are an easily adjustable weight for Arctic Cat models. They are adjustable in 1.3 gram increments so you can really fine tune your machine. They hit hard when you grab a handful of throttle, they backshift quick for improved throttle response, and they are smooth when you maintain rpm ranges. PRO-MAG weights are an easily...
USD $164.95
In Stock -
Arctic Cat / Yamaha Lite Weight Trackshaft Arctic Cat / Yamaha Lite Weight Trackshaft
Lite Weight trackshaft is 1 pound less than stock trackshaft. Fit's 2012-Up Arctic Cat models. Also fits Yamaha Viper and Sidewinder This shaft is very strong and has been used by several 600+ horsepower race sleds. Lite Weight trackshaft is 1 pound...
USD $199.95
In Stock -
2012-2017 PROCLIMB/PROCROSS TRACK SHAFT... 2012-2017 PROCLIMB/PROCROSS TRACK SHAFT...
PRO LITE 2012-2017 PROCLIMB/PROCROSS TRACK SHAFT W/8 TOOTH DRIVERS 1LB LIGHTER THAN STOCK PRO LITE 2012-2017 PROCLIMB/PROCROSS...
USD $329.95
In Stock -
TEMP SENSOR BLOCK OFF RESISTER-ARCTIC CAT... TEMP SENSOR BLOCK OFF RESISTER-ARCTIC CAT...
Sick of your pipe sensor going bad on your machine? You can bypass the sensor with this plug in resister block off. Then you don't need to run the pipe sensor anymore. This is a lot less money than the stock sensor too. Sick of your pipe sensor going bad on...
USD $44.95
In Stock -
HIGHER CLEARANCE 36" CHROME MOLY LOWER... HIGHER CLEARANCE 36" CHROME MOLY LOWER...
Whether you have a stock front end or our new PRO-Lite Forged front end, you can upgrade your lower A arms with these Chrome Moly versions. They are arched for extra clearance to help prevent hitting rocks and stumps. The Chrome Moly material is also very strong. The weight is about the same as stock, but better of course. Whether you have a stock front end or...
USD $459.90
In Stock -
ARCTIC CAT TEAM PRO MAG 64-86 GRAM... ARCTIC CAT TEAM PRO MAG 64-86 GRAM...
For Arctic Cats with Team clutches is our Pro Mag adjustable weights that are adjustable from 64-86 grams. They have 4 positions per weight arm with easy to use magnets. This allows you have proportion the weight just the way you want it, whether you want a light or heavy tip weight. And our price is even much less than a stock un adjustable weights. For Arctic Cats with Team clutches is...
USD $164.95
In Stock -
LED Light Bar 6 Inch LED Light Bar 6 Inch
Black Diamond offers a ful line of LED light bars, curved and straight. 3W Cree Each LED Operating Volt: 10-30 DC Color Temperature: 6000K Operation Temp: -40C to 60C Waterproof Rate: IP65 Beam: Spot Beam, Flood Beam, Combo Beam Material: Diecast Aluminum... Black Diamond offers a ful line of...
USD $69.95
In Stock -
BDX SPRING TOOL FOR TORSION HELIXES BDX SPRING TOOL FOR TORSION HELIXES
Adjust your adjustable spring rate clutch with ease using the BDX Spring Tool! For all BDX/SSI helixes with adjustable spring tension end cap. The back side accepts a 1" wrench or socket to make it easy to turn. When installing our clutch kits which have the torsion spring style helix, use this tool to fit into the endcap to adjust the spring tension. Adjust your adjustable spring rate...
USD $32.95
In Stock -
Dyno Jet Power Commander V (five) for... Dyno Jet Power Commander V (five) for...
We have been using power commanders for years. They are very precise and work extremely well. They sense true throttle position and rpm ranges to fine tune the maps. The auto tune can be added or the POD-300 gauge to monitor air fuel ratios, data logging and change to multiple maps. When you purchase from us we will put the map into it for our products... We have been using power commanders...
USD $429.95
In Stock -
Dyno Jet POD-300 Display Dyno Jet POD-300 Display
The POD-300 is an accessory display for Dynojet devices that support DJ-CAN; including the popular Power Commander V, AutoTune, WideBand 2, and CMD. The POD-300 is an accessory display...
USD $284.95
In Stock -
POD-300 Handlebar Mount Kit, BLACK POD-300 Handlebar Mount Kit, BLACK
POD-300 Handlebar Mount Kit, BLACK POD-300 Handlebar Mount Kit, BLACK
USD $99.95
In Stock -
PCV MAP SWITCH PCV MAP SWITCH
Use this map switch to toggle between dual maps on your power commander Use this map switch to toggle between...
USD $54.95
In Stock -
HYVO GEAR SET 21/49 HYVO GEAR SET 21/49
This is a popular upgrade for a machine with 7 tooth drivers and a 3" track. Stock machines, such as the M8000, come with 19-50 gears (2.63 ratio). Going to the 21-49 gears (2.33 ratio) makes a very nice improvement in track speed and performance while climbing. These are HYVO gears which can be used with your stock chain on 2016-2017 models. This is a popular upgrade for a...
USD $124.95
In Stock -
HYVO GEAR SET 22/48 HYVO GEAR SET 22/48
This is a popular upgrade for a machine with 7 tooth drivers and a 3" track. Stock machines, such as the M8000, come with 19-50 gears (2.63 ratio). For big bore and turbo machines, going to the 22-48 gears (2.18 ratio) makes a very nice improvement in track speed and performance while climbing. These are HYVO gears which can be used with your stock... This is a popular upgrade for a...
USD $124.95
In Stock -
DRIVE SPROCKET 8 TOOTH EXVOLUTE DRIVE SPROCKET 8 TOOTH EXVOLUTE
Track ratcheting? Old extroverts worn? Try out Xtreme 8 tooth extroverts! Fits all Diamond Drive trackshafts. 3.0 pitch. Fits Arctic Cat 2004 and newer diamond drive sleds, Arctic Cat 2012 and newer. Yamaha Viper, plus Sidewinder. Fits 1 3/4" hex shaft Track ratcheting? Old extroverts...
USD $89.95
In Stock -
Xtreme 9 Tooth Drivers 2.52" Pitch Xtreme 9 Tooth Drivers 2.52" Pitch
Old drivers worn? Try our Xtreme 9 tooth drivers! Fits all Diamond Drive trackshafts. 2.52 pitch Also fits all Arctic Cat ProCross / ProClimb, and Yamaha Sidewinder and Viper. Old drivers worn? Try our Xtreme 9...
USD $44.95
In Stock
