No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
New products
-
CATALYST 600 BOYESEN REED VALVES
BOYESEN REEDS ARE WORKING REALLY WELL IN THE CAT 6000 MOTOR. RECENT...
USD $389.95 -
Catalyst 600 Stage 2
Get the most power out of your Catalyst with this complete kit! Our...
USD $1,879.95 -
Catalyst 600 Stage 2 Cheater
Get the most power out of your Catalyst with this complete kit that...
USD $1,699.95 -
CATALYST 600 STAGE 1
Get more power out of your Catalyst with this one simple mod! Our stage...
USD $1,049.95 -
Catalyst 600 Stage 1 Budget
Get more power out of your Catalyst with this one simple mod! Our stage...
USD $739.95 -
PRO-MAX 2 CATALYST FRONT BUMPER
New for your 2024+ Catalyst! the PROMAX Front bumper Is the ultimate...
USD $199.95
Viewed products
-
STAGE 2 AXYS 800 TRAIL...
Powerful and quick acceleration with...
-
Weld-on Bushing for...
WELD ON BUSHING FOR EGT SENSORS
2025+ Catalyst 858 There are 16 products.
-
PRO-MAX 2 CATALYST FRONT BUMPER PRO-MAX 2 CATALYST FRONT BUMPER
New for your 2024+ Catalyst! the PROMAX Front bumper Is the ultimate combination of Lightweight, High Strength, Maximum Protection, and Shedding Snow! With it's mounts to the chassis on the bottom of the bumper and integrated skid plate this bumper is seriously heavy duty! No cutting or modifying required! New for your 2024+ Catalyst! the...
USD $199.95
In Stock -
Lightweight Secondary Clutch Spider Lightweight Secondary Clutch Spider
Lose over 0.85 lb of rotating mass of your machine with this one part making it the lightest on the market! Drop in, ready to go with rollers and snap rings installed and comes with a thrust washer for your secondary spring to prevent wear and prolong spring life. Machined from 7075 Aluminum and hard-coat anodized to ensure an ultra strong part that will... Lose over 0.85 lb of rotating mass of...
USD $129.95
In Stock -
BDX Inner Rail Brace BDX Inner Rail Brace
New BDX Inner Rail Brace is the only brace on the market to utilize the internal geometry of the Alpha rail to maximize the strength of the rail while minimizing weight. With this internal design, there is ZERO added surface area to the rail to catch snow and increase your wet weight as all other braces do and in the right conditions that can mean an... New BDX Inner Rail Brace is the only...
USD $99.95
In Stock -
ADAPT BILLET PRIMARY CLUTCH COVER ADAPT BILLET PRIMARY CLUTCH COVER
ADAPT Billet primary clutch cover replaces cats flimsy stock cast cover which is known to crack at the spring recess on the back side. Machined out of 6061 T6 with a serviceable oil impregnated bushing held in with a snap ring. The perfect balance of lightweight, strength and billet bling ADAPT Billet primary clutch cover...
USD $219.95
In Stock -
ADAPT TITANIUM HARDWARE KIT ADAPT TITANIUM HARDWARE KIT
2022 Was the first year of the ADAPT Clutch for Arctic Cat and Yamaha Sleds. It is already lighter and narrower than the TEAM Primary before, but we decided to bump it up a notch and introduced the Titanium Primary Clutch bolt that was the correct length and under half the weight of the OEM bolt. Now we went one step further and replaced every steel bolt... 2022 Was the first year of the ADAPT...
USD $149.95
In Stock -
Pro-Mag Arctic Cat ADAPT Weight Set Pro-Mag Arctic Cat ADAPT Weight Set
New for 2022 Arctic Cat released the Adapt Primary clutch. This clutch outperforms the previous Team Clutch in almost every comparison. Available in 3 different weight ranges to fill almost any need from single cylinder applications to 300+ HP 4 strokes! Kits include: 3 weights with bushings 48 magnets New for 2022 Arctic Cat released the...
USD $164.95
In Stock -
TITANIUM ADAPT PRIMARY CLUTCH BOLT TITANIUM ADAPT PRIMARY CLUTCH BOLT
Titanium primary Clutch Bolt/Washer combo for 2022 ADAPT Primary Clutch for the Arctic Cat snowmobile. 100 grams lighter than the factory steel clutch bolt and an inch shorter to correctly fit in the narrower clutch FOR 2-STROKES ONLY Titanium primary Clutch Bolt/Washer...
USD $44.95
In Stock -
UPGRADED ADAPT HELIX BOLTS UPGRADED ADAPT HELIX BOLTS
The factory Adapt helix bolts are notoriously out of spec Allen head bolts. They are prone to stripping out even with the "correct" size allen key. These new bots are a massive improvement with a T30 Torx head which is one of the most common sizes and stronger than the T27 commonly found in the Older TEAM clutch models. These new bolts come prepackaged... The factory Adapt helix bolts are...
USD $4.95
In Stock -
Super Lightweight Recoil Basket Super Lightweight Recoil Basket
A great way to shed some unwanted pounds from your machine. Machined in house out of 6061 Billet Aluminum, this is a direct replacement for the stock steel recoil basket shedding nearly 1/3 lb. of rotating mass. An easy, cost effective way to shed some unwanted weight and help increase throttle response at an even better price! A great way to shed some unwanted...
USD $79.95
In Stock -
ARCTIC CAT PIPE SENSOR DIRECT OE REPLACEMENT ARCTIC CAT PIPE SENSOR DIRECT OE REPLACEMENT
A direct replacement for a fraction of the price. This pipe sensor identical to the 2011-current Arctic Cat OEM Pipe Temp Sensor that is known to be prone to failure. Why block it off when you can have a working sensor for a fraction of the price! A direct replacement for a fraction...
USD $39.95
In Stock -
SUPER LITE BRAKE ROTOR 2018+ ARCTIC CAT... SUPER LITE BRAKE ROTOR 2018+ ARCTIC CAT...
Check our lightweight brake rotor for the 2024+ Catalyst and 2018+ Arctic Cat mountain sleds, Yamaha Mountain Max 800, Arctic Cat Riot X 2021. It's 3/4 of a pound lighter on 2021 models with the solid brake rotor, and 1/2 a pound lighter than the stock 18-20 drilled models. Less rotating weight and overall weight. This rotor also improves braking.... Check our lightweight brake rotor for...
USD $119.95
In Stock -
V FORCE REEDS ARCTIC CAT CTEC V FORCE REEDS ARCTIC CAT CTEC
V FORCE REEDS FOR THE ARCTIC CAT MADE 3 HP PEAK AND 4 IN THE MID RANGE ON A STOCK MACHINE! BOLT ON POWER! They really work well in this motor! Stock replacement Catalyst Reeds The new rubber coated cages make the durability of the petals simply the best on the market!! #V3112BR-873-2 Fits 2018-current Arctic Cat Ctec2 Models V FORCE REEDS FOR THE ARCTIC CAT MADE...
USD $258.00
In Stock -
BILLET BRAKE LEVER ARCTIC CAT/YAMAHA 2019+ BILLET BRAKE LEVER ARCTIC CAT/YAMAHA 2019+
Check out our Billet Brake Levers for the New Arctic Cat and Yamaha snowmobiles! CNC machined and then powder coated to match, or get a natural aluminum one. A direct replacement for the stock plastic lever, which breaks quite easily!! Our design is perfect for 1, 2 and 3 finger riders! Fits 2019+ Cats, 2021+ Yamaha Check out our Billet Brake Levers for...
USD $54.95
In Stock -
ARCTIC CAT TEAM BOSS STYLE DRIVEN SPRINGS ARCTIC CAT TEAM BOSS STYLE DRIVEN SPRINGS
We have two different springs for Arctic Cat with the BOSS Team driven clutch. White 150-220, typically used for flatland trail riding and all types of racing Dark Green 190-260, developed to use for deep snow and mountain riding We have two different springs for...
USD $21.95
In Stock -
ARCTIC CAT / POLARIS PRIMARY CLUTCH SPRINGS ARCTIC CAT / POLARIS PRIMARY CLUTCH SPRINGS
We have 3 different clutch springs for all Polaris drive clutches, and Arctic Cat clutches up to 2015, 5 springs that work in the 2016-21 and newer Arctic Cat Team drive clutches and 2 that work of the new 22+ ADAPT Clutches We have 3 different clutch springs...
USD $21.95
In Stock -
ARCTIC CAT CLUTCH PULLER 2010+ AND 2007+... ARCTIC CAT CLUTCH PULLER 2010+ AND 2007+...
Top quality heavy clutch pullers for your snowmobiles. One piece design, precision machined, and heat treated for strength. This model fits all 2010 and newer models, and 2007 and newer 1000 twin and 1100 4 strokes. Also fits: Wildcat UTVs, X and XX Yamaha MountainMax 800 2021 Top quality heavy clutch pullers for...
USD $44.95
In Stock
