If you have a 2012-2017 Arctic Cat ProClimb and you want to upgrade it to the 2018 Ascender hood and panels, then this is the best way to upgrade your machine!
New Special Pricing!
- Stainless Steel and Titanium
- As light as only 2.5 LBS!!
Pro Shift Clutch Kits for Arctic Cat, Ski Doo, Polaris
Stainless Steel and Titanium
FOR ADAPT CLUTCHES NEW FOR ARCTIC CAT IN THE 2022 MODEL YEAR! INCLUDES UPGRADED T30 HELIX BOLTS Clutching is the key factor to optimize the performance of your machine. Whether you have a stock or modified machine there is a lot of performance to be gained with our ProShift Clutch Kits. We have tested to produce more aggressive helix angles to provide... FOR ADAPT CLUTCHES NEW FOR ARCTIC CAT...
FOR ADAPT CLUTCH NEW FOR ARCTIC CAT IN THE 2022 MODEL YEAR! INCLUDES UPGRADED T30 HELIX BOLTS BACK COUNTRY PRO SHIFT KITS are designed for longer track models to be run at low altitudes in deep snow. They are tuned for very quick throttle response in deep snow for off trail riding, so that you have instant power all of the time. FOR ADAPT CLUTCH NEW FOR ARCTIC CAT...
FOR ADAPT CLUTCH NEW FOR ARCTIC CAT IN THE 2022 MODEL YEAR! INCLUDES UPGRADED T30 HELIX BOLTS MOUNTAIN SERIES PRO SHIFT KITS are designed for long track models in deep snow. They are tuned for very quick throttle response in deep snow when boondocking and climbing, so that you have instant power all of the time. FOR ADAPT CLUTCH NEW FOR ARCTIC CAT...
EVERYTHING you need to replace your TEAM primary Clutch with the better performing, lighter, narrower ADAPT Clutch! Works with all 2016+ Team BOSS Secondary Clutches Fits all models with 32mm Crank Tapers Kit includes: 0746-934 ADAPT Clutch Pro-Mag Adjustable weights EVERYTHING you need to replace your...
EVERYTHING you need to replace your TEAM primary Clutch with the better performing, lighter, narrower ADAPT Clutch! Works with all 2016+ Team BOSS Secondary Clutches (16-17 Models will need to remove Belt deflection screw) Fits all models with 33mm Crank Tapers Kit includes: 0746-933 ADAPT Clutch Pro-Mag Adjustable weights Titanium Clutch Bolt &... EVERYTHING you need to replace your...
New for 2022 Arctic Cat released the Adapt Primary clutch. This clutch outperforms the previous Team Clutch in almost every comparison. Available in 3 different weight ranges to fill almost any need from single cylinder applications to 300+ HP 4 strokes! Kits include: 3 weights with bushings 48 magnets New for 2022 Arctic Cat released the...
Brand New take off Headlight from a Arctic Cat ProClimb/ProCross. Fits 2012-2015 models. These headlights even come complete with the bulbs Brand New take off Headlight from a...
Brand New take off oil pump from a new Arctic Cat 800. This pump will work with engine reverse too. Retail $351!!! Save huge!! Brand New take off oil pump from a...
**CONTACT US FOR BULK PRICING** **CONTACT US FOR BULK PRICING**
We have two different rate torsion springs for our billet helix and quick adjust end cap. These only fit our helix, and not the stock helix. We have two different rate torsion...
Check out the PRO-TECTAIR!! Protect your engine from snow and water ingestion! This new design keeps the snow and moisture out of your airbox. Its fits Arctic Cat 800 and 600 models 2012 and newer, plus it fits the new Yamaha MountainMax. In stock!! Check out the PRO-TECTAIR!! Protect...
BDX has a developed a new replacement "ANTI-SLOP" steering post bushing for the Arctic Cat Pro-Climbs 2012-2021. We were the originator for the Arctic Cat M Series sleds, and the newer machines sure need it too. The Anti-Slop 2.0 bushing is made of a high strength, high yield, high compression material that will take up the slop of your factory... BDX has a developed a new replacement...
BDX has a developed a new replacement "ANTI-SLOP" steering post bushing for the Arctic Cat Pro-Climbs and Ascenders 2012-2020 Mountain sleds. Also fits the high country models with the dual post steering. We were the originator for the Anti-Slop kit for the Arctic Cat M Series sleds, and the newer machines sure need it too. BDX has a developed a new replacement...
Diamond drive seal kit for 2007-2011 models. Diamond drive seal kit for 2007-2011...
This simple kit supplies you with all of the roller bearings in the Diamond Drives. Don't forget to order your seal kit and lube at the same time. This version is for 04-06 models, and 09-11 models with engine reverse. This simple kit supplies you with all...
ROCK Performance Rollers are made from engineering grade plastics designed to withstand continuous exposure to elevated temperatures and severe stress conditions. ROCK Performance Rollers low coefficient of friction and ROCK hard compound make ROCK Performance Rollers the most advanced engineered rollers to date. Made in the USA ROCK Performance Rollers are made...
XTREME DUTY OIL CHANGE KIT 3 OZ. FOR NON REVERSE MODELS XTREME DUTY OIL CHANGE KIT 3 OZ. FOR...
XTREME DUTY OIL CHANGE KIT 15 OZ (09-UP REVERSE CASE) XTREME DUTY OIL CHANGE KIT 15 OZ...
Super Lite Weight Brake Rotor for 2012 and up Arctic Cat ProClimb, Procross, and Blast. Also Yamaha SRViper, Sidewinder, and Venom. Over 2.5lbs. less of rotating mass than the stock solid brake rotors Improved brake feel. Runs cooler. lighter than stock vented sno pro style brake rotor by 1.15 lbs!!! Super Lite Weight Brake Rotor for...
Phone: (507) 263-2244 Fax: (507) 824-9499
Black Diamond / Speed Shop Inc:
sales@speedshopinc.com
Black Diamond Machining Services:
sales@BD-Xtreme.com
Altitude Powersports